Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
man hubs
hp 44front 60 rear (like the J 20 had)
dana 300 twin stick 4 to 1
manual trans with a deep 1st gear 5:1 or deeper
a little bit beefer frame rails
230hp 300 ftlbs 4.0L engine
altinator up top
i have two options fliped dana 300 or a 4 to 1 231. i dont think the 231 would take the extra torque, i was also think on doing a 231/dana 300 doubler.
doyou ( jeep 87 cherokee) have the 465 in your xj
they will fit fine I run a 36 12.5 on a 7 " rim. The skinner rim will not pop the bead easier than a wider rim. the force of the tire compressing actualy forces the bead into the rim bead making it very tough to pop off the bead
I know its a unibody.. I should of re phrased to read reinforce between frame rails at the rear of the xj of the unit body I just thought that some of you smarter guys would overlook look the way I phrased it and woiuld help
sort of like a strong bumper But attaching the two frame rails of the...
I just got a new (Used) welder Hobart 175 I am faily comfortable welding. I have never welded to a Xj frame before I would like to sleve it or plate it.
what setings should I use and what wire. any help would be greatfull.
I have 36 12.5 tsl's on 15x7 never had a problem mounting them at all
the never come of the rim i usualy air down to 7 psi, check out the pic section on this web site mine is the brownish colored xj
http://www.kawartha-offroad.com