Recent content by rmonte4812

I have a 98 xj 4 1/2 lift. New control arm bushing, new trackbar bushings , new ball joints, everything tight, steering box tight, new stabilizer. No drop pitman arm, shocks about 2 years old. Toe in about 1/8-1/4 in, camber about 6° Tires are 265/75 r16 Goodyear mt/r kevlars. stock jeep wheels...

Can bad ball joints be part of a DW problem? I've rebuilt all my control arms and track bar, still have problem. I put the front end up on jack stands lifting the tires only an inch of the ground then used a pry bar to lift the tires. There was about an 1/8 play up when I did that. Could that be...

Thanks. Got her back together. Left carrier in and used all thread through the axle tube to the spiders to compress clutch disks. Worked out pretty good.

Is anyone familiar on how to reassemble an 8.25 limited slip. I was going to change my cover this weekend and when I pulled the cover off I noticed an few chunks in the bottom of my diff housing. I was able to pull out the spider gears and install some new clutch parts. The problem is getting...

Are the coke ovens open to run?

Heres my 98 from a camping trip up on the rim.

Depends on what you want, stock type rubber or polyurethane. Ive had good luck with ones from NAPA. At first i used some crappy ones from auto zone and the lasted about six months or less. I have avoided poly type only because the will transmit noise and vibrations a lot more then rubber.

Got mine yesterday, Painted today, installing this weekend. Thanks for the fast delivery and a high quality product. Cant wait to test them out

Im in. This will be my first run with NAXJA. Look forward to meeting everyone

Thanks for the help. I kinda figured it went through the radiator to warm it up quicker and not cool. And thanks for mentioning which side you put it on, that was my next question.

Hi There, im going to be installing a new bigger transmission cool and was wonder if I should bypass where it goes in to the radiator. I live in Phoenix AZ so cold weather isn't an issue. Just wondering what peoples thoughts are on this. The jeep has 32's and Ill be starting to tow a small...

Axle width at the hub

Does anyone know the hub face measurement of our xj's? I've got a 98 with an 8 1/4. I'm sure they are most likely all the same. Thanks

So should I do the relocation and extended shackles? Along with a better ride I'd like to get about and inch of lift. My wife has now figured out what JEEP really stands for.

The angle is nearly vertical right now