Recent content by Red XJ

No! I had the stock arms for months and had no shake. Then the shake came around so i put the new ones on just the other day.

I had no caster before i put on the new lower control arms and it was that way for months before the shake came. So i add 1 inch to the lower control arms. i hope today i will be taking it to get aligned. I shall also rotate the tires and check the balance of them.

I have a 86 XJ with 5 inches of lift from a 3 inch coil +2 inch spacer. The rear has a 3 inch add a leaf with a 2 inch block. Had the 3 inch for about two years, with stock everthing. Now put in 4.88 gears and the 5 inches about 6 months ago, and had no problems. I went wheelin one day got a...

I have been rocking the same track bar and have had no problems for months so i didn't belive that was my issue. That is my next weekends project, i was pushing off thinking the ball joint and the caster was my problem.

i have the problem but at any speed above 2nd gear. While taking a turn or hitting a little bump mine will shake. I mean bad shake to the point of having to slam on the brakes to make it stop. i have tried rotating tires, alignment, new ball joints, lower control arm, and new steering rods.

Has anyone had what i call the death shake? I can go down the street or hit a little bump and the jeep goes into a shake and i mean bad, it also bangs alot too!! I just put new steering rods in, ball joints, and lower control arms. All the mount for the control arms look good, i see no rub...