• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by pszczepan

  1. P

    Radio chrysler and PCI bus connector

    Hi ! What for the PCI bus plug is connected to the radio ??? C3 at left side http://wjjeeps.com/audiowire.htm If I disconnect this connector everything works OK - no problem at all
  2. P

    10 pin square connector replacement

    I made myself AUX output built on processor and I have to connect it to radio via this connector. thanks Pawel
  3. P

    10 pin square connector replacement

    I've just checked and it is whole cable. I am looking just for a 10 pin plug without cable. Probably Tyco bought AMP - so I wrote them email, but I guess that now some other third brand makes it and I am digging that.
  4. P

    10 pin square connector replacement

    I used search at dodgeparts.com and type in: 5080971aa and nothing found? hmm
  5. P

    10 pin square connector replacement

    Hi ! I am looking for 10 pin square plug which is here. http://wjjeeps.com/radio_cdch_cable1.jpg Originally it was made by AMP, but it was long time ago. Do you know brand which makes replacement of that. What is the aftermarket P/N of this thanks Pawel
  6. P

    DIN8 Cd changer socket - factory radio

    Hi I have Chrysler Unit from 1998 and Ipod adapter and it works OK. My friend has similar unit made by chrysler with the same DIN8 socket and it is from 1999. Sockets are the same, but the adapter does not work with his unit. Do you know what difference is between those units. I guess both...
  7. P

    Key codes and XJ 99

    It should show error code , if there are some: Here I found: "OBD-II information is more complex, so the codes for 1998 and newer Jeeps can't be displayed by flashing the check engine light. However, those vehicles which have digital odometers will display the codes on the odometer. I've...
  8. P

    Key codes and XJ 99

    I made procedure: " Insert the key but do not turn. Fully depress the trip reset button and hold down. Next turn the key to the on position three times and then leave in the on position. Release trip reset button and the gauges will flicker and the odometer will count down and then show the...
  9. P

    OEM car audio user manual needed 1999

    Hi ! I bought jeep cherokee limited 1999 with radio Do you have user manual for it? thanks Pawel
  10. P

    engine temperature droping during starting

    When the engine is not overheat the coolant level looks OK, but I also noticed that during the hot day when the tempeerature is going really high the coolant level is going up to the top of overflow bottle and I saw there small crack. High coolant pressure going throw it. Do you think that my...
  11. P

    engine temperature droping during starting

    Hi ! Jeep Cherokee 1989 4.0 l automatic Recently I noticed something strange. When the engine is hot the engine temperature is correct (205 F) - quite constance. When I stop f.e. because lights are red still temperature gauge shows OK, but after that when I accelerating the gauge is droping...
  12. P

    1989 and 1992 - different brake rotors?

    Hi ! My friend has 1992 Cherokee (with ABS) for parts and rotors are OK. Will they fit my Jeep Cherokee 1989 (without ABS). When I check rockauto.com for rotors I see that same brands have the same part numbers for both years, some other different. What is the true? Thanks Pawel
  13. P

    Rear axle knocking

    Hi ! Recently I pull out the diff cover and I inspected spider gear. Please look at the picture: http://img292.imageshack.us/img292/8071/spider1oj8.jpg In place where I put "A" arrow I noticed that when I turning left/right rear driveshaft there I see the small gap - it is not tight. Arrow...
  14. P

    Looking for Ac-Delco U-joints diagram

    Hi ! I want to order some u-joints for my Jeep 1989 . Rockauto.com offers many, but they have specs like that: http://img521.imageshack.us/my.php?image=acdelconb1.jpg Do you have guys these Diagrams to find out which u-joint I need. I would appreciate if someone could publish it. Thanks Pawel
  15. P

    ZJ Alternator swap for Renix

    I got it - why it happened. Through A terminal the current goes quite high. Original wiring cannot service such a current - this is the reason why everything winked. I had to connect "A" connector directly to battery "+". "S" - terminal must be connected to ignition switch - It should be...
Back
Top