Recent content by paredxj

Thank you everyone for your help. So I removed everything and found out I was a full turn and a half off from where the pitmen arm needed to be placed on the steering box. Such a rookie move on my part Sent from my iPhone using Tapatalk

Pitmen arm is a small drop and the steering box is newer only seen light trails twice Sent from my iPhone using Tapatalk

I removed the hydro set up from it all together, no change in the turning, also looked to see if anything was rubbing and outside the drag link sitting on top of the tie rod nothing is rubbing. I took the pitmen arm off the steering box to see if the box was binding up and it was turning good.

The jeep was just completed in December I took it out on the trails 2 times this year. I’ve had the hydro set up for 4yrs but this was the first year on the trails with it. The drag link and tie rod do touch a little. The clamp just kiss very little. The one on the diff is clear. I thought the...

Ok Sent from my iPhone using Tapatalk

I’m gonna try to discount the hydro lines tomorrow and see what happens Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

The ram is a 6in ram and i have it coming off the diff to the tie rod it's split at 3in. I'll try to upload pics off my phone tonight.

Yea, I have plenty of power steering. It just seems like there is something stopping it from going over to the left side.

steering box turns fine when the pitmen arm is unhooked also checked it before i put it in.

I've had 2xjs with the same issue. I have a 98XJ i'm running 8in rustys offroad long arm kit 37x14 irocs with rockkrawler steering upgrade with agr rock ram hydro steering assist. I thought i had it dialed in but i don't i've got great turning to my passenger side and dam near nothing to my...