Recent content by outlander

is this the replacement frameside bushing? https://www.amazon.com/Rubicon-Express-RE3704-Super-Ride-Bushing/dp/B006GJP3Y2

So my super flex bushing frame side is shot....anyone have a part number to delete the superflex bushing for a regular rubber or poly bushing? On the same topic how much articulation does having that spherical superflex provide over regular solid rubber or poly?

Im all too familiar with the renix hot restart vapor lock.....this problem is different.

for craps and grins Ill throw on my spare(new never installed oem) CPS.... The one thats in there now has about 7 or 8 years on it so its probably about time for replacement from a maintenance standpoint.

Humid also yes....however im going to rule out a contact or ground issue because i have gone through all of that when I did cruisers renix fixes.

This one's hard to diagnose because it doesn't do it all the time 95% of the time it runs like a raped ape but he does seem to be a factor because up until this hot spell it never did anything like this could it be possible that it's coil?

89 xj 4.0 stick shift. I have an intermittent problem it seems like it has cropped up since the weather has been in the 90s here. Sometimes when I start the engine and go to Revit it will only go to 1000 RPM then it starts to spit and sputter. Then after about 20 or 30 seconds of pushing on the...

Mine has some play in it. Reading your post about slop and possible sheared pin prompted me to drift out my roll pin just to rule it out and it was one piece intact....guess the slop is from the dist/cam helix gears being worn slightly I'm of the opinion that once you set the .20 cleareance...

This setup would serve three purposes: Jeep camping opsec. Trail blindspot navigation Traditional back up cam. (Ive often wished I had a reverse camera while backing into/out of parking spots or hooking up a trailer)

yea Im thinking the side mirrors will be the best spot to mount the side views... The more I think about this idea the more research I find myself doing. Another cool idea I have concerning muddy lenses is teeing into the washer reservoir and running windsield sprayers sourced from rhe JY...

However lets not veer off into tactics or cover and concealment negating the need for a sentry system or even sustainability...I've thought about the details...

Yes by night vision I meant IR. I dont even want to think about getting into FLIR or Real night vision. I should have added that caveat. Hell cheap IR illuminating flood lights can be had cheap also...Would be so cool to bed down for the night and have the entire woods lit up via IR flood...

**EDIT** I found the info.....sorry for the thread hijack.

how much are dues now anyway,since we veered off original topic...

decisions,decisions...hmmm lemme drink a beer and decide what model to go with. I see you have a trade in program(I believe I have a version one beta)that sweetens the pot very good indeed!!!