Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Hey everyone,
A friend of ours may have a chance to drive the MFS Buggy in the 2010 King Of the Hammers race in February. Will is a fellow XJ owner and I think we should all go over to Pirate4x4 and vote for HeavyMetalXJ to be the driver. He's in second place now and needs a little more than...
Well today a little more progress was made on the Jeep...
The transfer case input gear was machined down to spec and the transfer case put back together. Now I'll have the Tera 4:1 LOW kit in, the Tera 2LOW kit too and a snazzy Novak shifter that will match the Ox locker shifters.
I should...
Here's how I decided to mount my Ox locker shifters in the center console.
I made a cardboard template and then cut it out with some thin stock and the plasma cutter.
I primed it and got it ready for paint.
Mounted them in the cab and labeled front and rear in case I have um...
When I first got my bumper I rushed to get it on for a trip without doing it right. Here's how I hacked it up the first time around to try and get ready in time... shame on me!
So Billy at Xtreme offroad decided to make it much more accepting for a winch and even has a place to weld my tube...
Right now I'm working on getting a new e-brake setup on the XJ. Since I swapped in the Waggy 44 in the rear, I lost my e-brake setup.
It will be similar to a pinion brake like you see on the larger Rockwell axles but done at the output shaft of the transfer case on the yoke. I'll have...
I bought a 1997 XJ with 190xxx miles on it two summers with the intentions of building a serious trail rig. I wanted something I could pay cash for and then build as I go. I used to have a 2001 TJ that we owed a lot on and I dumped 8k into it with the lift, suspension, winch, bumpers, sliders...
And who's the hottie with the nice rack? Sorry was just looking at the rest of your build pics and her boobs seemed to distact me a bit in your photo gallery!
lol
What was the reason for going leaf springs in the front and not just doing a long arm setup? Also - you might want to beef up the shackle mounts that are welded to the unibody... IMO - you may have had a stronger mount by taking a piece of retangle 1/4" thick box tubing, cutting the top off and...
Call Zach at 505 Performance. He just set me up with all new steering for my XJ for $325. 1.25 DOM .360 wall tube with hiem joints. I got a tie rod for my Waggy D44, a new drag link and trac bar.
505-333-2600 or www.505performance.com