Recent content by FuryIII

I guess the best thing for me to do is check the pattern and backlash to make sure it was set up correctly.

Thanks, I'll take another look. Still don't understand the cause.

Can anyone tell what happened here? I had this HP D30 geared to 4.56 from stock. They installed a Spartan. I don't like the lunchbox upfront, steering. So I strip it down to install an air locker. But, this is what I see with shaving in the oil. There's no movement in and out and while I didn't...

I stripped them clean, two coats of weld thru primer then cleaned up the areas to be welded.

Did you guys go all the way around with the seam sealer or only the top and sides. I don't wanna trap water between the rail and stiffener.

I live in North East Ohio...term Rust Belt applies. Got the HD stiffeners installed, full set. Perimeter is stitched, rosettes filled. I used Weld Thru on the Stiffeners and some on the cleaned to bare metal frame rails. I sanded the primer off the areas to weld on the frame rails, didn't like...

Just waiting for mine to arrive!

I called them about 6 months ago or so about their 3 link kit because I was interested in it. They told me they don't make it any more and there are no plans for it in the future.

I've got 2k Black XJ that I've owned since new. She's bruised and battered. NJ and Ohio salts have eaten the rockers and part of the driver's front floor pan. I've done allot over the years, new radiator, water pump, typical stuff besides what listed in the sig below. I'm on the fence now, try...

I bought the CavFab a couple of days ago. Will see how it goes.

Not knocking B.Lee's kit but some observations between the two. CavFab boxes in the control arm mounts, making them less apt to bend. The shape of the cross member being angled in the front to better to slide over objects vs rectangular tube of B.Lee I may be wrong but with cutouts for the...

It has plates that mount to the side of the frame rail too.

What do you guys think of this kit? http://cavfab.com/CavFab-Jeep-Cherokee-XJ-3-Link_p_61.html

I'll hit up Craig's list, Ebay and the local junk yards, see what pans out.

Anyone know where to get a decent replacement front seat? The one I have is terrible.