Recent content by flagdad

American_zero I recently started running a 31” fallen mt and I’m trying to find the right pressure. Been running 28ish in the front and 26ish in the rear. If you find a sweet spot let me know what pressure you like.

I picked up some tweeters from team Cherokee ( I think). Dropped the lower dash and what do you know, the tweet brackets perfectly aligned with the mounting holes behind the cutouts. There were also plugs already there labeled speaker. I can hear the difference and for $10 I’m calling it a win.

My 93 has the cutouts for speakers in the lower dash. I’m thinking of hooking some up but can’t find the wiring diagrams in my manual. I’ve got diagrams for everything but speakers. Anyone have a diagram or know the colors for those speakers? Sent from my iPhone using Tapatalk

Well, If anyone ever stumbles across this post I will let ya'll know what I went through and maybe you will learn from my mistakes. After 3 weeks of no start (had fuel & spark) and throwing parts (cps, tps, map sensor, plugs & wires, fuel pump, filter, computer) at it, I opened up the...

Btw, I’ve read about the nss; other than wiggling the selector in park and neutral is there a good way to check this?

Hey guys, I’ve been trying to get my 93 to start for a couple of weeks. It’s getting up there in age so I decided to throw parts at it: cps, tps, fuel pump. Still cranks but no start. I’ve got spark and good fuel pressure to the rail. I’ve tried spraying starting fluid into the throttle body but...

Got the right push nuts a NAPA. Heep still won’t crank but at least I have dome lights. Lol Thanks again everyone

Thanks all. I got side tracked with what I hope is a failed fuel pump. I’ve changed out cps and tps and about to test fuel pressure. Then I’ll sort out the push but issue.

Help. I took out my dome lights months ago to address the problem of them constantly burning. I finally fixed them but now can’t find the push nuts I took off that hold them up. I can’t find ones small enough anywhere, online, auto parts stores. These are the little nuts that fit into the two...

Replaced the LCAs with longer beefier ones. Also started the led headlight replacement. Just need to establish which wire to tap for the DRLs. Sent from my iPhone using Tapatalk