Recent content by coldcdn

Ok so where do I find the residual valve and once I do what do I do to it so my brakes will function properly tha ks

Iam not familiar with the residual valve, can I pls get more detail thankyou

Also the front brakes are the ones mainly affected, with the jeep on stands in neutral I can maybe get one revolution per spin either side with the tire one. The rears feel normal

Specs 1994 xj 4.0 ax15 Front axle -1989 dana 30 new calipers pads rotors Rear axle - 19?? 8.25 with liberty disc conversion new rotors pads one new caliper So I have been experiencing a slight amount of drag and can't seem to figure out what it is, as stated above most everything is new. Has...

Quick question about my 1992 limited Cherokee the factory security system when I reconnect the battery is active lights are blinking Etc read through all the post found that there is a green wire with an orange Tracer that you permanently ground to disable the system permanently. On which...

Really genius and how would I have done that on Friday night after they were closed?. so yes I posted on here to vent my frustration and hopefully see if anyone had info that would help me when I did talk to them on Monday morning. In the future unless you have a helpful comment maybe you...

Just an update,have been in contact with Novak am very impressed with the level of customer support to resolve the issue. it's nice when a company seems genuinely interested in making sure you're happy with the product and that it works for you. Still in the process of figuring out what exactly...

Really wanted it to be a simple install, but that inst the case not to sure why everything is stock. It's a 242j mated to a aw4 and no modification to mounting points so wtf?. Left a msg will hopefully here from them on Monday

so I decided to do away with the stock and huge pain in the a$$ transfere case shifter. I was actually looking forward to the install all straight forward no hassle and get it done sort of job and from what I heard would end up with a great result. Well that was not the case had to get it...

Thanks for the info just picked up the new belt not too worried since my rig doesn't have AC but thanks for the heads up

K so I have swapped a 99 intake onto my 92 4.0 along with 99 power steering pump what lenghts of serpentine belt should I be running and if anyone has a pic of the routing that would help as well thanks guys

So figured well I was finishing things up I'd like to dress up the engine bay a bit does anyone have a good recommendation for coloured silicone hose kits I'd like to match my block went with a bright green so I could easily spot and trace oil leaks

Picked up the cork gasket did a light smear of silicone on both sides and tighten it down fit was bang on so don't expect any problems thanks again

Thanks I'll check them out

Thankyou