Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
I would say check your ball joints for play, then check your wheel bearings for play, if those are good you could also check your throw out bearing as you say it goes away when you push the clutch in.
ya...I did pick the lift up today in the 4-Runner ....and was checking everything out. The pins in the leaf packs are to short. I will need longer ones for the shims. Looks like they will prob work with the floating shims but I have the non-floating shims.
JDs- do you have longer pins in stock...
I just got the RE 3.5" SuperFlex kit in with full leafs and I also got 4* shims to go with the SYE. It looks like the center pins in the leafs are too short to accomidate the shims. Do I need to get new pins or ????
i looked into redrilling the hole on the axle mount......looks pretty close to the stock hole to be and doesn't look very safe....maybe I should get the RE TB!!!
I just ordered the RE 3.5" SuperFlex kit but it doesn't look like it comes with any bracket for the TrackBar. Is it neccessary to modifiy the stock TrackBar or get an Adj Trackbar for this lift.....anybody have any issues leaving it stock
my brother is a dealer mechanic and he says this is common on these engines. As long as the oil port is leaking externally and not into the cylinder or waterjacket you should be ok...I would check the coolant for any oil and even do a compression check on all cylinders to be sure.
I have been trying to find out if a stock front DS will bolt directly to a SYE (not a HnT) ....so you have stated it will bolt up to the PORC but what about the Omix Aida SYE or any other full SYE???? Is there a writeup for this or any pix?
I have a 2000 4.0l Auto NP231, and 8.25 rear....what...
I have been trying to find out if a stock front DS will bolt directly to a SYE (not a HnT) ....so you have stated it will bolt up to the PORC but what about the Omix Aida SYE or any other full SYE???? Is there a writeup for this or any pix?
There is no such thing as a body lift for the XJ....The XJ is a Unibody and there is no Frame to lift off of and therefore you cannot do a body lift.....