• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by cgflightmech

  1. C

    t-case lowering problems

    Thank you for the help. I have decided to heli-coil insert the two mount points. Thanks again, GREG
  2. C

    t-case lowering problems

    I have a 95 XJ w/ RE 3.5 superflex and a 3/4'' t-case lowering spacerers. I had a problem with the front right side t-case skid plate mounting point. Basically, the bolt I put in there won't to tighten past roughly 30 inch lbs. and the right rear mount point popped down about a 1/4 '' and...
  3. C

    RE 3.5 super flex leaf spring

    I was just outside looking at my jeep and I wonder if my leaf spring attatchment bolts are overtourqued. The thumping over moderate bumps I am refering to is almose like something is rubbing.
  4. C

    RE 3.5 super flex leaf spring

    I am going to look into that. Thank you.
  5. C

    RE 3.5 super flex leaf spring

    I have DT 3000 shocks mounted front and rear in the stock set up
  6. C

    RE 3.5 super flex leaf spring

    I installed a RE 3.5 superflex w/full leaf packs on my 95 XJ. I have stock shackles. There is a thunking noise coming from the rear end over moderate bumps. It almost sound like the shackles are rubbing. Anyone had this noise? Thanks
  7. C

    posting pics

    Anybody know how to post pics
  8. C

    1'' T-case drop HELP

    thanks
  9. C

    1'' T-case drop HELP

    was going to install a 1'' T-case drop on my 95 XJ. One of the mounts area bolt and the other is a stud. Is that stud removeable?
  10. C

    RE lift install update

    Thanks for the tips everyone. The installation is going well. I still have to re-connect the front track bar @ the new mount hole, re-connect steering linkage to pitman arm. Put on the new rear shocks, put on my shiny new BFG A/T 31x10.50x15's. torque it and test it. I will have my before...
  11. C

    RE lift install

    hey Gary yeah, I am going to do it at the auto hobby shop. I am sure it will stay overnight
  12. C

    RE lift install

    I am installing my RE 3.5 super flex kit today w/ full leaf packs. Any last minute advice? all I am using are the instructions that come with the kit thanks
  13. C

    dana 35/chrysler 8.25

    Thanks for the Help! I can't wait to put it on and post my before and after pics
  14. C

    dana 35/chrysler 8.25

    what is the difference between the dana 35 rear axle and the chrysler 8.25 rear axle? Is the Chrysler 8.25 thicker? I think I got the wrong u-bolts from RE with my lift. Can I get these u-bolts at a marine supply store or hardware store? thanks
  15. C

    crawltech update

    Zero
See more
Back
Top