Recent content by BattlebornXJ

Thank you everyone. Got her fixed. It was indeed the fuel pump. The problem got worse and worse to the point where it was quite predictable. I hooked a fuel pressure gauge to the test port on the fuel rail with a long enough hose to reach the passenger compartment which allowed me to monitor...

For what its worth, I have two identical XJ's. After installing 3.5" lifts, one had death wobble and the other didn't. There seems to be a razors edge difference between death wobble and no death wobble. My lift kits came with adjustable lower control arms. Tweaking the caster helped, but thats...

Thanks for the responses guys. No check engine light, no stored or pending codes. Fuel pump is a few months old (best one I could buy at NAPA). I changed the fuel pump because the jeep wouldn't start on the first crank no matter how long you cranked it, but always stared quickly on the...

Hello all, I'm an old guy and have little experience with forums so go easy on me. I have two nearly identical XJ's. A 2000 and a 2001. The 2000 is just fine, it's the 2001 that is giving me a migraine. I say this because I'm swapping known working parts between the two to eliminate...

Just dropped a new motor in my 2000 XJ. On first road test, there was a loud creaking/popping/groaning noise when turning the wheel. I had thoroughly cleaned and pressure washed the engine bay and thought maybe I had blasted all the grease from the steering U-joint or the steering box. The motor...

Had the same problem. Have a 2000 XJ. Suddenly fan not blowing air from vents. Passenger kick panel fuse #25 good. 40A fuse under hood in Power distribution box good. Switch has continuity. A/C clutch engages when A/C is selected. Connected fan motor directly to 12V, fan motor good. Fan motor...

I'm new to the forum and I am looking for some friendly advice. It's time for a new motor in my 2000 XJ. I want to build a complete motor, then perform the swap. The overall poor opinion of the 0331 head has me considering using an older core with a 7120 head. The lack of mounting points for the...