Recent content by AllXJ96

Well, i believe my engine is running way rich, i put a bored out tb on but its been running rich before the tb. My engine also feels like its kicking in at around 3250rpms when accelerating hard, what do you guys think is causing this, and what can i do to solve it, any thoughts are appreciated...

Im all alone ... theres no one here beside me... dont mind my boredom

Need Shock Id plus a couple q's ID this shock for me http://www1.snapfish.com/slideshow/AlbumID=45225258/PictureID=1343666225/a=53698400_53698400/t_=53698400 The ?'s Does it look like these shocks would work with an aditional 2in of lift on top of the 2.5in lift already on? For a total of...

Im planing on running 4.5" coils front and a 2"shackle ontop of my previous 2.5" add a leaf. Ill tell you how that goes when i do (round 2 weeks) But i also have a question, my shocks are yellow, does this sound like stock shocks?

ok, it is a 96 4.0 l6, it sounds like something is being tossed around inside the motor when you go to start it up, it turns over but will not fire (or even try to), it made the same sound as soon as i turned the key off when i pulled into the gas station (the start of the problem)

This is rather ironic, but a few days ago i pull into the gas station to fill up to go do some muddn, and when i pull in and as soon as i turn the key off, i hear some klunking from under the hood, i prayed it was nothing, filled up (1/2tank, poor ) I go to start it up and it klunks like krazy...

This is rather ironic, but a few days ago i pull into the gas station to fill up to go do some muddn, and when i pull in and as soon as i turn the key off, i hear some klunking from under the hood, i prayed it was nothing, filled up (1/2tank, poor ) I go to start it up and it klunks like krazy...

Its not overheating, and i just replaced the hoses, thermostat, and radiator, the highest it goes is 235deg, im just looking for a way to help keep it a little kooler @ stop lights in this 95+deg weather

Ok, my jeeps been running a little hot a stop lights (i live in south florida ) i was thinking about putting an electric fan between the front grille and the radiator. Has anyone done this, and if so, where did you get the fan, i was thinking the junkyard, but every fan was too large, i will...

You need to increase your wire speed or go buy .035 size and 70s2 type steel wire, and since your using MIG you need to make sure your base metal is wire brushed very well, and if its rusty go ahead and lightly grind the surface. As you have seen, the wire size makes a MAJOR diff, good luck

Take your throttle body to a machine shop, you can get it bored to 60mm (which is the size of the trail jammer kit) and you wont have to replace the butterly, or bore it to 62mm and have them make you a butterfly for it, buy a rustys or K&N intake system, and you could buy a computer module like...