Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Rolled through inspection station this morning. Passed emmisions and they never even questioned anything else. They did seem a bit pissed since mine is a 95 and they had to get out and do the tailpipe test.
I didn't think roadside inspection spots would even look at non-commerical vehicles...
Spoke with local mechanic since mine needs emmisons sticker and didn't want to chance running through state inspection station. Mine is a 95 so they must use a gas analyzer. He told me as of August 2012 state of new jesery only checks emmisons and has no safety inspection requirements. He told...
narrowing down for SAS in 2001 Dakota quad cab.
I read about the pinion nut size (1 5/8" for D60 versus 1 1/8" for D50), was hoping someone would be able to translate Ford tag.
Thanks
found a guy with a Dana 60 front axle assembly on craigslist. He claims its out of a 1994 Ford F250 yet a quick web search showed that the majority of the front axles were Dana 50's. He emailed me a pic of the Ford tag on the axle but I am having no luck confirming its really a 60.
I will be...
Does anyone have pics of the installation of the A to Z tire carrier spindle? Not sure how high the machined section of the spindle must be above the surface of the bumper. Looking to keep it as tight as possible to the surface of the bumper.
Also, anyone have any issues with installing the...
I just did this a coupe of months ago without any experience at all. Watched the YouTube video about twenty times, took it apart, bagged, and labeled as I went. It wasn't that difficult but my jeep isn't a DD so I could take my time with it.
Good luck.
I just installed the 4.5" LA kit, it now has about 125 miles on it. Today was the first highway run to see how it would handle. Got it to 70 and it handled much better than I thought it would. Steering is a little sloppy yet thats likely the box since its 17 years old.
Rear leafs are really...
Think I found it. I retorqued the springer hanger bolts then took it out and beat on it to see if I could get the noise to occur. Drove 40 over a bunch of speed bumps and no issues. Think the sring was binding in the mount and then letting loose sideways since the hanger bolts loosened up. No...
Yes, I am running the full leaf pack in the rear.
I torqued the u-bolts down yesterday thinking that was the issue but the noise still popped up. I was thinking overnight that maybe I didn't grind enough off at the lower shock mounts and the shock bumpstop plate was striking the oem shock mount...
1995 XJ 2 Door
4.5" RC LA suspension lift
AA SYE
TW Cardian DS
32x11.5R15 Mud Claw radials
Installed suspension lift and got driveshaft for the rear. Odd thing is that there is sometimes a loud thump or bang coming from the rear suspension when making turns at slow speed where the ground isn't...
I have about 40 miles on the 4.5" kit running on the front shaft. I was under the jeep tonight checking the bolts and realized I have a transmission leak now. Looks to be coming from the rear of the pan. Headache is now with the long arm cross member, there is no easy access to the rear pan...
Can anyone with the advanced adapters SYE kit confirm that Spicer 2-94-28X u-bolts will work with the yoke? I ordered a tom wood's CV driveshaft and just realized the AA SYE kit din't come with the u-bolts. I want to pick up the bolts before the shaft arrives.
Thanks
Good point:
1995 Cherokee Spot with 106,000 miles.
RC 4.5" Long arm lift
RC tie rod
all new brakes (hard and soft lines)
All new tie rod ends
32x11.5R15 Cooper Mud Claws
15x8 steel wheels w/3.75" BS
85%DD, 5%hunting, 10%camping
still need to pick up rear driveshaft, once that's in, I plan...