![]() |
|
|
Midwest Chapter Discussion of Chapter issues. Please keep Tech Topics on the Tech Forums. |
![]() |
|
Thread Tools |
Rating: ![]() |
Display Modes |
#1
|
||||
|
||||
Build thread: Out of Misery, again...
Out with the old, in with the new. One of the hardest things I've done was sell my Jeep. Here it is driving off into the sunset with her new owner...
My objective is to build a smaller jeep, with both great road manners and very capable off road manners. This is the start platform of my new build. It is a Georgia Jeep that is super clean, it even has solid floor pans!!! I bought it for $500 with a bad motor, and it currently has a Yohn brand transfer case. (aka, 2wd). I need drivetrain, so I went back to craigslist and found this 98 that was hit in the ass. I paid $800 for this jeep with 170k miles. Currently I have sold the front clip for $250 and the rear axle is spoken for another $75, which leaves me at an investment of $475 for the parts jeep, which after a part out and scrap, I should be money ahead with a free drivetrain. Last edited by Fore Wheeler; May 10th, 2013 at 11:31. |
#2
|
||||
|
||||
Re: Build thread: Out of Misery, again....
My first task was to start the parts buying. I decided to make this primarily an Iron Rock Off Road jeep. I am so impressed with the company, not only kick ass products, but their support of
![]() list of IRO parts: 5.5" Critical Path Long Arm Kit Premium Rock Sliders HD over the knuckle steering D30 truss 8.25 truss H-n-T SYE Custom driveshaft 4.56 gears, front and rear My second call was to our very own Brian Ho Bag, aka HD Offroad front, mid and rear stiffeners no lift shackle relocation brackets wheel balance beads I also went to the tire store. 33x12.50 Good Year MTR Kevlar 15x8 DC 2 Wheels I also contacted RWK Haus for my front locker, after much debate and input from my ![]() Last edited by Fore Wheeler; May 10th, 2013 at 11:31. |
#3
|
||||
|
||||
Re: Build thread: Out of Misery, again....
Can't wait to see it when you get it done. A lot of good parts are going on it.
|
#4
|
||||
|
||||
Re: Build thread: Out of Misery, again....
Id skip the IRO arms, but thats just me. Looking good man
![]() |
#5
|
|||
|
|||
Re: Build thread: Out of Misery, again....
Is your rear leaf springs being used again or did you get new ones? I would be interested in the old ones if they are still pretty arched.
|
#6
|
||||
|
||||
Re: Build thread: Out of Misery, again....
There will be a part out thread when I'm ready to part it out
|
#7
|
||||
|
||||
Re: Build thread: Out of Misery, again....
I see pics. Looks like a good project.
__________________
ChiXJeff Lifetime member "Jeeps are Cherokees. All other models are wannabes." Deb. K. |
#8
|
|||
|
|||
Re: Build thread: Out of Misery, again....
I'm liking this already. I love that it's a clean vehicle to start with. Should make building it a bit easier.
Them riiimz is hawt! I'm sure you'll get to it, but what are you thinking about in terms of armor? |
#9
|
||||
|
||||
Re: Build thread: Out of Misery, again....
For those who can't see my pics, go to my profile and look at my pic albums. I host my pics on naxja.
|
#10
|
|||
|
|||
Re: Build thread: Out of Misery, again....
Can't see the pics in your post either, but checked them out in your profile. Sweet start! Looking forward to seeing this progress.
|
#11
|
|||
|
|||
Re: Build thread: Out of Misery, again....
Looks like a good build Dan, I have a silver one almost identical to that, it won't be near as cool though
![]() Can't wait to see where this goes. -Collin PS-if you want to sell any of the silver body parts or trade for dented ones plus cash (before you rail on it) let me know. I need basically all of them ![]() |
#12
|
||||
|
||||
Re: Build thread: Out of Misery, again....
Im thinking about going with that IRO steering. looking forward to seeing this build
__________________
Be the change you want the world to be |
#13
|
||||
|
||||
Re: Build thread: Out of Misery, again....
HD Offroad wins the race to be the first to get parts to me!!!! Thanks Brian
|
#14
|
||||
|
||||
Re: Build thread: Out of Misery, again....
Quote:
![]() |
#15
|
|||
|
|||
Re: Build thread: Out of Misery, again....
Quote:
![]() If you do decide that you'd consider it, I'd make it worth your time, I can't find silver 97+ body parts anywhere around here. I'll quit derailing your thread now ![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
...sorry...another build thread... | blondejoncherokee | Sierra Chapter | 1501 | June 30th, 2015 15:07 |
Icy roads and other people's misery | atomicboy235 | NorthWest Chapter | 7 | January 19th, 2011 21:03 |
'Out of Misery II' | Fore Wheeler | Midwest Chapter | 11 | June 23rd, 2009 06:00 |
The build thread | DutchVDub | Colorado Chapter | 101 | March 15th, 2009 09:25 |