Steering/Stock Axles/Brakes/Etc

[Unearthed]

Going through a new build. Have to get rid of some stuff to make room for others. Will have a lot more coming as I make my way through the years of parts and items. All listed is currently in Brooklyn, NY but can deliver to certain areas possibly;


-RockJock CE-9701 CURRECTLYNC Jeep Heavy-Duty Tie Rod System ($450)

The RockJock heavy duty tie rod and drag link system for TJ, LJ, ZJ, XJ, and MJ vehicles features a 1 1/4" diameter forged chrome moly drag link, 1 1/4" chrome moly bar stock tie rod that is bored and threaded on the ends. All 7/8" thread tie rod ends with urethane boots, and jam nuts are included. This unit is a direct replacement for the stock unit - no modifications or machining to any part of the vehicle is necessary.

Designed for stock height or up to 6" lifted vehicles

Fits:

1997-2006 Jeep TJ Wrangler (all models)
2004-2006 Jeep LJ (Unlimited) (all models)
1984-2001 Jeep XJ (Cherokee)
1986-1992 Jeep MJ (Comanche P/U)
1993-1998 Jeep ZJ (Grand Cherokee)
No stabilizer attachment available. Painted with spray paint, could easily go back to black.

https://www.rockjock4x4.com/CE-9701-...teering-System



-Dana 30 High Pinion 3.55 Gears 100k miles on them (free)

-WJ Hubs used, 30k miles (free)

-Stock D30/8.25 Covers (free)

-2WD WJ axle (stripped it for knuckles/brakes) Would be a cool swap for a gasser, etc.

-WJ Stock steering (free)

-D30 Low pinion, no carrier. Had 4.88’s. Need to be replaced. New rotors, new pads. Has shafts. ($100)

-8.25, stripped to bare housing, was going to use until I found a 8.8. ($50)

-8.25 29 spline shafts ($50). Needs new studs.

-8.25 lincoln locked carrier with 3.55 gears ($50). Worked fine for 20k miles.

-ZJ->XJ disc swap for 8.25, have brand new pads and rotors. All parts here except parking brake ($200)

[Unearthed]

-Also brand new Ruffstuff 8.25 cover unpainted, since I'll be going with the 8.8 ($120)

[Rock2pus]

Interested in the steering, but also how old and how beat is it?

[Unearthed]

Originally Posted by Rock2pus

Interested in the steering, but also how old and how beat is it?

Couple of years old. Not terribly beat. I would run it, except went with WJ knuckles. https://www.facebook.com/marketplace...tory_type=post

That's my link that's on FB. I have no idea on how to post pictures on here anymore.

https://www.rockjock4x4.com/products...lacement-parts Currie still makes all the replacement parts for it too.

[Unearthed]

does anyone post on here anymore? Out of the game for a bit.

[jeep ride]

You have host pics somewhere like imgur or your favorite site then link them to your post here.