scott00tj
NAXJA Forum User
- Location
- Medina, OH
I've retro fitted my '99 Cherokee with cruise control, but its not working. The parts are used so I cannot say for sure if they are 100% working. Serves me right for trying to save a buck.
When I press the on off switch the dash light will turn on or off. Pressing set would seem to do nothing and so I cannot tell the condition of the resume cancel button.
I've checked for vacuum at the servo and while I don't know how to take an official reading I can put my finger over the vacuum line and it will “suck”.
I've seen other threads about checking the control buttons for resistance, but I'm not sure how to do this. I am fairly certain the buttons I have are for a '99-'01 XJ.
Checking the clock spring I can't say I know how to either. The horn works, there is no air bag light on the dash, and as I said when the on/off is presses the dash light works so I'm guessing that the clock spring is okay? If there is an actual real way to test this for sure please help me.
I'm ready to do any testing or work to figure this out, I just don't know how to test these individual parts other then pull one and try another. Any suggestions and how to would be appreciated.
When I press the on off switch the dash light will turn on or off. Pressing set would seem to do nothing and so I cannot tell the condition of the resume cancel button.
I've checked for vacuum at the servo and while I don't know how to take an official reading I can put my finger over the vacuum line and it will “suck”.
I've seen other threads about checking the control buttons for resistance, but I'm not sure how to do this. I am fairly certain the buttons I have are for a '99-'01 XJ.
Checking the clock spring I can't say I know how to either. The horn works, there is no air bag light on the dash, and as I said when the on/off is presses the dash light works so I'm guessing that the clock spring is okay? If there is an actual real way to test this for sure please help me.
I'm ready to do any testing or work to figure this out, I just don't know how to test these individual parts other then pull one and try another. Any suggestions and how to would be appreciated.