smalltownbird
NAXJA Forum User
- Location
- newport news,va
I upgraded my entire harness according to the write up on gojeep. I used 10awg wires with 40amp relays and H4 plugs. Before I had the eautoworks harness and it kept killing relays and eventually the hi-beams stopped working. This is why I did my own harness. Now when I turn the hi-beams on the relay clicks and then the "right side hi-beam fuse" pops in the passenger side kick plate on my 98. Does anyone have any ideas of where to look that is causing this? I've traced all the wires in my harness and there are no shorts or ground issues. Thanks for any help