NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > Bargains and Deals > For Sale: Private Party Only. XJ ITEMS ONLY
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

For Sale: Private Party Only. XJ ITEMS ONLY Private Party Ads only. If they even smell commercial, they will be deleted.

Reply
 
Thread Tools Display Modes
  #1  
Old December 8th, 2003, 18:40
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
dana 30 dana 44 and misc jeep parts

Dana 30 HP out of a 96' non-disco 89' Knuckles but have the others but no brake parts for the others that is why the 89 are on it

4.56 gears, open diff, reenforced trac-bar mount before it goes to the buyer, knuckles are drilled to flip tie rod, no swaybar mounts, rusty's tie rod conversion, and brand new ball joints; one spare drivers shaft and alot of spare parts and spare 89 housing

Dana 44 out of a cherokee

Drum brakes, factory shock mounts still on there, and 4.56 gears, also open; one spare shaft

both complete with everything, brakes in good condition, and gears have less than 1500 miles on them

jeep parts:

revolvers for a cherokee..........125 shipped or pick up
all kinds of spare leaves...........look atwhat you want and make offer
front and rear bumper cherokee.......make offer
dana 30 diff no spiders............free
dana 44 diff 3.73 and down.........20 bucks
two sets of rims 1) black rockcrawlers 15x8 5 on 4.5 i think neutral bs 125 plus shipping or pick up 2) the same as other except white and rusty (need to be sandblasted used them as my offroad rims) the black ones cannot go till i get rid of the axels

i must sell the axels to perform a full width conversion so the axels tires and steering components are still on the jeep and need to go before i can do the swap

would like to keep the axels together along with the steering, everything else is first come first serve.

ben
Reply With Quote
  #2  
Old December 8th, 2003, 20:24
Tim88XJ's Avatar
Tim88XJ Tim88XJ is offline
NAXJA Forum User
 
Join Date: Jun 2002
Location: Cary, NC / Wilmington, NC
Posts: 234
Re: dana 30 dana 44 and misc jeep parts

IF you were able to find a buyer for the rear d44 (I already have one) How much would you want for the Front Axle alone? It could be shipped for around $100 via forward air, or we could possibly arrange to meet.

Do you have any use for a set of 5 BFG A/T's (31x10.5x15, all with 0 Miles) in exchange +Cash for your set of axles? If so, I may be able to afford your whole set.

Anyway, Let me know, Tim
Reply With Quote
  #3  
Old December 8th, 2003, 20:42
Lucas's Avatar
Lucas Lucas is offline
NAXJA Forum User
 
Join Date: Mar 2003
Location: ZOO YORK CITY
Posts: 1,106
Re: dana 30 dana 44 and misc jeep parts

how much for the axles and where are you located?
Reply With Quote
  #4  
Old December 8th, 2003, 21:08
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
Re: dana 30 dana 44 and misc jeep parts

i could want to get 1000 for the both but i am up to offers but i am pretty close to it they would not be able to get pulled for about a month so it will be a little bit i am college kid trying to fund my full width swap. they are still under my jeep right now


as for the one 30 it comes with rustys tie rod conversion and you read it had a lot of stuff removed. with the steering 500 without 300

i live in auburn al 36832
Reply With Quote
  #5  
Old December 8th, 2003, 21:10
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
Re: dana 30 dana 44 and misc jeep parts

also i have no use for the tires i am currently running 35s but will be going larger when i swap in the other axels
Reply With Quote
  #6  
Old December 8th, 2003, 21:57
DPC DPC is offline
NAXJA Forum User
 
Join Date: Jul 2003
Location: Washington
Posts: 80
Re: dana 30 dana 44 and misc jeep parts

Where are you located(for shipping purposes)?
Reply With Quote
  #7  
Old December 8th, 2003, 22:23
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
Re: dana 30 dana 44 and misc jeep parts

auburn al 36832

it is in my post 2 before this one
Reply With Quote
  #8  
Old December 8th, 2003, 22:53
Dazz's Avatar
Dazz Dazz is offline
NAXJA Forum User
 
Join Date: Apr 2003
Location: DFW, Texas
Posts: 293
Re: dana 30 dana 44 and misc jeep parts

The spare shaft is for the rear XJ d44 correct? If so, which side and how much you want for it?
Reply With Quote
  #9  
Old December 9th, 2003, 08:10
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
Re: dana 30 dana 44 and misc jeep parts

dazz i posted on ju but the spare shaft goes with the axel
Reply With Quote
  #10  
Old December 9th, 2003, 09:58
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
Re: dana 30 dana 44 and misc jeep parts

axel sell pending

tie rod conversion will be available when axels are pulled and all other parts available now
Reply With Quote
  #11  
Old December 9th, 2003, 10:13
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
Re: dana 30 dana 44 and misc jeep parts

revolvers are 125 plus shipping just saw that
Reply With Quote
  #12  
Old February 5th, 2004, 23:43
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
new prices and pics


Dana 30 HP out of a 96' non-disco 89' Knuckles but have the others but no brake parts for the others that is why the 89 are on it needs lower control arm mounts, last time I went wheeling the passenger side got ripped off (it is welded back on so it drives).4.56 gears, open diff, knuckles are drilled to flip tie rod but needs the sleeves, no sway bar mounts, rusty's tie rod conversion, tweaked adjustable trac-bar, and brand new ball joints; one spare drivers shaft and a lot of spare parts and spare 89 housing

550 for dana 30 and long arm and new crossmember

Home made long arm kit 1 od dom tubing with 1 id and currie jonny joints on the frame side mount. These are fully adjustable upper and lower with grade 8 threaded rod. This will get rid of both factory mounting positions all you need is a crossmember and I can give you all the specs of mine to build one. I might be convinced to sell mine with the right price. I am thinking I will need it with my full width swap though.

Dana 44 out of a cherokee 450 plus shipping or pick up

Drum brakes, factory shock mounts still on there, and 4.56 gears, Lincoln locked; one spare shaft

both complete with everything, brakes in good condition, and gears have less than 1500 miles on them

900.00 for everything above

jeep parts:

revolvers for a cherokee..........125 shipped or pick up
all kinds of spare leaves...........look at what you want and make offer
two sets of rims 1) black rockcrawlers 15x8 5 on 4.5 I think neutral bs 100 plus shipping or pick up


ben

pics

http://aucrawlers.suddenlaunch.com/i...num=1075933935
Reply With Quote
  #13  
Old February 6th, 2004, 07:30
tnxjjeeper tnxjjeeper is offline
NAXJA Forum User
 
Join Date: Dec 2003
Location: Chattanooga,Tennessee
Posts: 194
how much for the white wheels?
Reply With Quote
  #14  
Old February 6th, 2004, 10:11
cheroking cheroking is offline
NAXJA Forum User
 
Join Date: Dec 2003
Posts: 104
Quote:
Originally Posted by tnxjjeeper
how much for the white wheels?


white wheels have been sold
Reply With Quote
  #15  
Old February 6th, 2004, 15:36
witt's Avatar
witt witt is offline
NAXJA Forum User
 
Join Date: Apr 2003
Location: Riverside/San Jose--Cali
Posts: 391
Pm'd ya
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 13:29.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014