Leaf spring ID bushing?

Hey guys, I have a RE 6030 lift. Does anyone know what the front eye bushing ID is? I assume it is the same as factory, but no idea what that is either! LOL, HELP!

I want to get these orbital bushing for the front, but want to make sure it will fit... these are the ones I am looking at for $40 http://www.secureperformanceorder.c...D=14&ClassID=180&SubclassID=854&ProductID=964

Thanks,
Jason

if you have the leaf springs, you could always measure them......????

and if that's a newer kit, RE went with a smaller than stock bushing size, at least it is on my leaf springs from 4 years ago.

_nicko_

I bought my Rubicon lift about 15 months ago... of course I can measure, but its fairly easy to be off an 1/8 since its on the jeep..... this of course is what will happen if no one has the measurements from a set not installed or from there brain.....

just thought worth asking.

Jason

the stock ones are too big to put the bushing in the front, i just measured mine and they are at the very least 2.25". if the RE springs use a smaller bushing perhaps it will fit in those...