• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Anyone Know a Good Sheet Metal Welder in N. DFW Area?

My DD 96 Cherokee XJ was a Beach Vehicle for 5 Years.
The Floor Pans have just about Completely Rusted Out.
I have purchased a set of Full length R & L Floor Pans & Also have a set of R & L Front Floor Pans (Got a Great Deal on eBay) for Extra Pan Metal.

My Problem Is that I Can't Find anyone to Weld In the New Pans.
Called around & Searched the Net. But, No takers.
All of the Body Shops give the Same Answer: "We Only Do Insurance Claims, Sorry".

So, Anyone Here Know Where I can get this done?
Any :NAXJA: Members down here in my area (Lake Dallas, TX) Know anyone or are Willing to Do the Work?
I am ready, willing & able to pull the carpet, padding & seats Myself.
Heck, I'll even Cut Out The Bad/ Rusted crap Myself.

I am Ready & Willing to Pay Cash for their/your Time & Labor, Plus, I Even have Trade Items (Strong Axle Cast Iron 9.25" Diff Cover & a Cast Alum. Dana 35 Diff. Cover) for Boot! And, I'll even buy the Beer!

Any Leads or Contacts Will be Greatly Appreciated.
UncleSarge58
479-234-0720
Please Leave a Message
Thanx
 
Need Good Welder in North DFW, TX Area
Also Have a Flux Core Wire Welder back Home in Arkansas.
Problem is that I Can't Weld Sheet Metal worth a Darn.
And It's in Arkansas & I'm down here in North DFW, TX for Work.

Any Good Write Ups on How to Do it yourself, Here on :NAXJA:?
May have to Go Get my Welder & Start Practicing on some Scrap Sheet Metal.
Would Much rather have Someone that Knows what they're Doing to Do it For me.

Any Leads or Tips Are Greatly Appreciated.
Thanx,
US58
 
Finally Found a Reputable Place Here Locally. Epic Offroad, in Lewisville, TX.
Got a Quote for $200-300 to Cut Out, Clean Up & Weld in New Floor Pans!
They will Also Weld Up & Install my Rock Sliders that I have PreCut, for $50!
For the Floor Pans, All I have to do is Get the Seat Mount Bolts Loose & Tear Out the Carpet.
For the Rock Sliders, I'm gonna Cut Out the Rockers & Mock Up Mount w/ 4 Bolts per Side.
Gonna Tackle It all this weekend!
Halleluya! Finally Gonna Get this Project Finished Up!
US58
 
Back
Top