NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > Land Use / Off Topic and other Forums > Non-Tech / Off Topic
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Non-Tech / Off Topic The popular Non-Tech Forum. NO SPAM at all. Period.

Thread Tools Rate Thread Display Modes
Old August 4th, 2019, 21:32
bradleyheathhays bradleyheathhays is offline
NAXJA Forum User
Join Date: Sep 2010
Location: Lexington, KY
Posts: 263
Tracking / steering issues

My '11 Crown Vic has got 315k miles on it and I'm having some kind of tracking problem that I think is coming from the steering. If there's not much wind it drives straight down the road just fine up to about 60 mph. But if the winds up some, or if I take it up to 70, it's tracking characteristics start to get weird and unsettling. Rain seems to cause it to get worse as well. The feeling is not dissimilar to hydroplaning.

I got the wheels off the ground and pushed/pulled on all the tires..3 and 9 o'clock, 6 and 12. Back wheels were solid, and the fronts were ok when I did the 6 and 12, but on the 3 and 9 test the tires moved about 1/4". They didn't move easily say as if they were completely loose, but it didn't take all that much effort to get them rocking either. At each limit of movement there's a low grade thud that's coming from somewhere between the two wheels, pretty close to the center of the car I'd say. I don't know if the movement I'm seeing is normal, but the degree the steering seems to be unpredictable would seem to correlate to about the degree of movement I'm seeing with the 3 and 9 test.

Any ideas on where I go from here?
Reply With Quote
Old August 13th, 2019, 15:47
bradleyheathhays bradleyheathhays is offline
NAXJA Forum User
Join Date: Sep 2010
Location: Lexington, KY
Posts: 263
Re: Tracking / steering issues

Just got the car back from a front end inspection and they're saying my biggest problem is that both lower ball joints need to be replaced. I've done work similar to this before (using a pickle fork to separate joints and using a rented ball joint press) but they were advising it might be too tough of a job to do by myself in my driveway. I have a 1000lb impact wrench but only a really small compressor.

What do you guys think about attempting this job myself? Any advice?
Reply With Quote
Old August 14th, 2019, 14:04
JohnX's Avatar
JohnX JohnX is offline
Sarge <3 Ben
Join Date: Nov 2004
Location: Rancho Cucamonga CA
Posts: 9,559
Re: Tracking / steering issues

They're just trying to scare you into having them do it.

Lower ball joints on that should be rather simple.

Put the new joint in the freezer. Place a floor jack under the control arm in a spot that wont interfere with joint removal. Remove tire, brakes, knuckle, etc. Then hammer out the joint. Take you nice icy cold ball joint and press it in, should go easy since it will be very cold....metal contracts. Reassemble all the removed parts.
Praise Marty Moose!
Reply With Quote
Old August 14th, 2019, 23:54
bradleyheathhays bradleyheathhays is offline
NAXJA Forum User
Join Date: Sep 2010
Location: Lexington, KY
Posts: 263
Re: Tracking / steering issues

Thanks for that freezer info. I've decided I'm gonna give it a shot at doing this myself. 'Couple' questions...

- I know the lower BJ presses out, but does the top one press out as well?

- Does the sway bar link have to come off for better access?

- Anything else I should change out while I'm in there? So far I'm gonna be doing both upper and lower BJs and probably the tie rod ends.

- I've been told to use green loc tite. That would be used on the threads on the bottom of the BJs?

- Also been told to watch out for the spring shooting out at me but I believe I have a shock in spring, a strut? Is there any danger of this spring suddenly popping out after tension is eased? I don't plan on removing the spring at all.

- The Moog BJ I'm considering at Rockauto doesn't appear to have a grease boot. Am I looking at this picture wrong? Is that black part a boot that will expand when it's filled up?

Reply With Quote
Old August 15th, 2019, 04:39
SlowXj SlowXj is offline
NAXJA Forum User
Join Date: Nov 2017
Location: East Tn
Posts: 93
Tracking / steering issues

Normally ppl here recommend Spicer bj's. That's my preference as well. They're not much different in price. Check Amazon for a good deal.

Sent from my SM-G950U using Tapatalk
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Steering Wheel Slop and Tracking Wanders thebyus OEM Tech Discussion 6 December 4th, 2014 09:20
steering issues. rockclimber Advanced Fabrication and Engineering 45 November 24th, 2011 14:53
tracking issues SUA SPONTE Modified Tech Discussion 3 November 24th, 2008 12:04
Steering box issues IllianaXJ Modified Tech Discussion 3 May 20th, 2008 14:12
steering issues PETEY Modified Tech Discussion 1 July 6th, 2004 20:24

All times are GMT -7. The time now is 18:57.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014