NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Unibody Jeep Technical Forums > Jeep Cherokee XJ (1984 - 2001) > Modified Tech Discussion
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Modified Tech Discussion Forum for Tech related discussion for Modified XJ's and MJ's.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old May 27th, 2021, 02:02
Muddy98's Avatar
Muddy98 Muddy98 is offline
NAXJA Forum User
Join Date: Jan 2017
Location: Medford, OR
Posts: 50
"PayDay" my 2000 XJ Build,

This is my third XJ.

It took me three years to find the body I always wanted and I finally found one about a month ago.

It has 250k on the odometer and I bought it without knowing about the 0331 head cracking issue but after alot of trial and error found out the head was cracked and decided to replace the engine before I started with the suspension.

I picked up 97 grand cherokee with a stack of papers and new parts new tires etc with a freshly rebuilt front end, 120k on a very well maintained engine. It could potentially be 75k miles and the second engine but I can only go by what carfax and the paperwork can prove.

i got it for 800$ and started the swap knowing I had some modifications to make it work

First I ordered a set of brown dog rubber motor mounts and then begun work on the swap

Bought kilmat sound deadener and double din panel for whenever I get around to the interior amd started ordering parts

Pulled the engine then taped everything off and "redneck" power washed the engine bay with one of those jet nozzles for a garden hose, degreaser and simple green. This thing was caked with grease

Parts starting to pile up

Flushed the heater core and radiator.
Heater core was black 😳

Always label everything, (Tip) if you leave a large peice of cardboard in the sun for a few days it'll get brittle and let's you press bolts and nuts into it so they're kind of locked in and then you can label things on the cardboard.

I went ahead and replaced the oil filter adapter seals, front seal and timing chain/gears, Then i replaced the rear main and oil pan gasket the next day.

I bought this odb2 scanner for 20$ for when I go to install the o2 sensor adjustable non foulers (they come with different size inserts in the foulers) so that I can check the voltage and adjust amd make them read stock.

Cleaned the donar engine up amd taped it up to get ready for paint

Been cleaning parts the whole way and painted the intake

Bought 4 hole injectors and a flowmaster 44
And replaced the power steering resevoir seal.

Replaced the harmonic balancer added new water pump and grabbed a thermostat

Painted the fuel rail, throttle body and thermostat housing. I really like this paint.

Replaced freeze plugs (although I may redo them tomorrow because I think they're messed up)

Took the 97 header to an exhaust shop to get a cracked fix amd weld some bungs for the downstream 02 sensors, then pulled the exhaust and just went ahead and ordered a 99 downpipe as it was cheaper than what my local shops were quoting me.

Ended up trying that new northeastern non crinkled pipe and waiting for it to show up through the mail.

Bought new gates hoses while I was in town, looked to be the best form fitting ones.

Painted the coolant resevoir after cleaning it for 3 days then accidently got electrical cleaner drip on it while I was spraying all the connectors out tonight but even if I gotta touch it up no biggie I think it turned out good.

And here the engine sits as of today

Today I did some more cleaning of the engine bay and painted the oil and tranny dipstick that same red anadized color. And cleaned all the electrical connections. I plan on just doing the valve cover anadized blue.

I also had to clean and repaint the other fuel rail as i overlooked that there were specks of rust inside the the one I had painted before :/ so I used the one of the 97 and gonna have to double check the fuel system. The injectors wernt clogged so I don't know what that's about..

I apologize if anything out of order or if I missed anything I'll add it to the next post iv been pretty busy with it and couldn't figure out how to upload pictures until I downloaded the taptalk app and wanted to start this thread before I got to behind on myself.. there's still alot to do and I'm trying to get her back up and running before fire season starts but if you have any questions feel free to ask. Iv been wanting to do one of these build threads for quite awhile.

Sent from my SM-A516U using Tapatalk
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Troy's "I need to quit working on my wife's Jeep" build troy5118 Midwest Chapter 64 November 28th, 2017 23:09
my "wannabe jeepspeed" grand cherokee build grandrunner JeepSpeed, Prerunner and Competition Tech Forum 157 July 1st, 2014 04:48
Project Jericho Stroker build. "The Craigslist Homerun" jwittlock Modified Tech Discussion 36 December 29th, 2012 03:14
MG's 2000 2Dr Build "Greyhound" MG2000XJ North Atlantic Chapter 44 June 23rd, 2011 12:43
98 XJ Sport, lifted "Project Impound Build" XJ&CHZ4ME MWC For Sale/Wanted Forum 5 May 20th, 2011 13:19

All times are GMT -7. The time now is 13:12.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014