RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
I need to build a new bumper to tow with, I want to start with a DIY Dirtbound and continue from there with extreme tie-ins and additional bracing to get to a class IV rating and finally a tire carrier. I got started this weekend yanking the bumper and gas tank skid off, along with drilling out all the rivets for the bumperettes and nut strips. I knew I had some old damage behind the bumperettes. Then I cut out the frame-rail holes, they will take 2"x4" tubing up to the filler neck. I bought the SFR boxes thinking the weld nut from the shackles actually passed into the frame rail! They don't, the next is the depth/height of the fuel filler hoses.