• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Winterfest noob trail question.

Yes everything was pre bent. And most was pre notched. But 99% of their notches i had to touch up. Without the X it would fold up in the event of a rollover. I just got in my PRP seats this past weekend so I'm in the process of installing them and have come across a few issues with the b pillars and the harness bar in my way. So the harness bar is getting cut out and a new one bent to make a little extra room and it will get ran for Winterfest.. Then I'm thinking the b pillars are going to get cut out and remade so i have more room up front.

But i had plates made for the roof that were welded around the tube and then sealed between the roof and plates.
53d1b864a87a3865c782d905e00c9c8e.jpg


Sent from my Pixel XL using Tapatalk



What did you use as sealer? Do you have a pic of the finished outer part?


Sent from my iPhone using Tapatalk
 
Back
Top