• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Titan Monster 4.9 300 Cubic Inch Jeep Stroker

You *ARE* wildjeepchick. You know when you log in with two accounts on the same computer, the system reports that to moderators right?

AAAAAAAHHHAAAAA!!!!
 
Update...... Had the 4.9L for almost two years now. Still running strong with no major problems. One year left on the warranty.
 
Thanks for the update. What kind of gas mileage are you getting? Also what did you do to get this running? Larger injectors and/or adjustable MAP sensor? Anything else? Sorry if you've already said in a prior post.
 
I have had a Titan 4.7 in my renix XJ for over 2 years now and am very pleased. Service was excellent and they answered all my questions. You guys that dont have personal experiance with a company shouldnt spread rumors. In my case Titan provided a great product and I would not hesitate to buy from them again. I am from Northern Michigan and am in no way affiliated with Titan, so dont even go there.

If you havent dealt with a company, dont badmouth them.
 
If you havent dealt with a company, dont badmouth them.


We have dealt with them. We've dealt with them coming on to our forums, creating multiple fake accounts and using them to lie about their products.

Not the actions of a respectable company.
 
I just typed up a 2000 word paragraph on exactly why not to purchase anything from Titan (I have, recently, and it didn't run) and the page went backwards. Don't you just hate heat sensing touchpads?

So here's the background: I purchased the Cam, Crank, and Rods separately. I told them the specs and they said they could build it for me (4.6 stroker). So after I get the engine and swap all the parts over to the new longblock (after we cleaned them, minus the dist and alternator), we crank it up and break in the new cam. It was at someone's house who helped me. We were also installing a suspension kit and 4WD on it. A few days later I crank it up and go to drive it about 3-4 miles back to my house. The whole time it was acting erratic. In mid-drive it would start shaking the jeep horribly, oil pressure would drop from 40 to 20 gradually, and at lower rpm it would feel like it's about to shut off. During driving when it started doing that I would hit the gas more and it would go away. And that is how I drove it back to my house. During that time it felt like it had no power at all considering how much throttle I gave it. It had a lot less pep and pull than before. I didn't understand any of this since it ran fine during the cam-break in procedure. So that's when I called Titan back... they had me do the timing (myself, and I'm not ASE certified like the guy that helped me). I messed it up. I took it to a mechanic who did it two different times with the same results that I had while I was driving it. They talked with Titan over the phone both times to confirm they were doing it correctly. So in the end I paid them 80 bucks and towed it back to Titan so THEY could do it.

It's been sitting in their parking lot being on the bottom of the totem pole in between other jobs for the past 17 days. They managed to adjust the timing after the first 7 days and decided (because it ran just like it did for us, crappy) that they need to take off the valve cover and look at the cam. They came to THAT decision 10 days ago. Subtract a weekend and you have 8 business days. In that time they have not even TOUCHED the valve cover. They won't do that until "monday" so I'm to call back Tuesday; and just so you all know, any time you are told to call back just know that they won't have touched it by then and they'll give you another 2 day time frame to call back... at which point they MIGHT have started. It was like me calling them was the only thing reminding them that they needed to work on the $2400 engine I purchased that never ran more than 4 miles... and has been there in their parking lot for over 2 weeks.

It took them 7 days to check the timing which was "way" off. I don't know if that's true or if they're saying that so they can nickel and dime me for every penny and blame the timing on why it didn't run.
I do know that when we first put it in and ran it, it was spot on. From there when I tried to drive it back to the house 2 days later is where we had the problem.
The engine wold drop oil pressure to 20 from 40 and bounce between 20 and 30 eventually just tapering off from 20 to 10 and shutting off. The engine would start vibrating horribly and then the whole vehicle would shudder with it in tune before it shut off. So keep in mind I told him it ran fine... and gradually degraded this way. He tells me to adjust the timing, so I did. I know I XXXXed it up. So I took it to another ASE certified mechanic and they did it while they were talking to Titan over the phone. They got it to where it ran like it did before I touched it. So I took it back to Titan.

That was 17 days ago. 7 days to set the dist timing and come to the conclusion that they're going to open up the valve cover, another 12 days to actually open the valve cover and look at the cam. Or maybe it's 12 to open the valve cover and another 3 before actually looking at the cam. or no.. I call back in 3 and they tell me to call back in 2 because they haven't touched it. Then when I call that time I call the next day; oh, by the way, our warranty isn't covering this. You'll be paying for it.

I sense that this coming weekend they still aren't going to have touched it. If that's the case I'm going back down to Florida and paying a company to have it towed to NC. I'm going to take it to the hobby shop on base and work on it my damn self. Titan has been a complete waste of money.

They have a sign in their parking lot that says "Not responsible for vehicles that have been here over 30 days," and their business is right next to the ghetto. With the way they're taking their sweet ass time it'll be stolen before they even get started on it.

I honestly feel like Titan carries the true F'you'over mechanic spirit that goes with the typical persona applied to a "mechanic." Only they charge you for an initial gauranteed pricey job that they didn't do correctly, then charge you more for the follow on problems you have that they deem aren't part of their warranty.

All I wanted to do was come back from Okinawa after two years, put in the 4.6 and add all my accessories and go off-roading. I wanted to be able to do that within my 30 days on leave before going to Camp Lejeune, but I guess that was way too much to ask. The more I think about this the more it pisses me off. And they're charging me to look at the cam, and do anything form there on too. That's a kickass warranty system they have going.

So if you want to run the risk of going through this process, just call Titan Engines and they'll hook you right up.


CoffeeCommando~

Cheap cork gaskets were also supplied. The valve cover leaked so I bought a felpro to replace it.

You'll want to replace the following:
Oil Pump (should be provided if you buy a stroker)
Water Pump
Timing Chain (should be provided if you buy a stroker)
Timing Chain Gasket Set
All new hoses
Ignition Coil (if you drop yours while transferring. Mine had a paper thin crack and wouldn't work)
Distributor Rotor
Spark-Plugs
Spark-Wires
Fuel Injectors (you should have already bought these, 24lbs)
Harmonic Balancer
1 Big Jug of Purple Power

If you can, have all these before hand. We had to halt progress in order to get the harmonic balancer, then again for the ignition coil. Both had to be ordered.
And a lot of purple power and hard tooth brushes/scuzz brushes to clean off the items you transfer to the new block (oil pan, IM - extremely gunky item, valve cover, etc. etc.)

Read this report.
http://www.naxja.org/forum/showthread.php?t=939290
I like to add that the one I fitted for a customer has since died too!

Also, just a little more. The timing was spot on from the time it initially started up, and we broke the cam in just fine (the guy helping me ias ASE certified, owned his own mechanic shop for about 8 years and had his own lift as well as every tool known to man, to include air tools, in his back yard garage). He drives his own race car and builds engines on the side as well as doing auto repair for anyone who needs anything.
So from the time it broke in, and I turned it on for a few minutes each day just to listen to it for the next 3 days afterwards, it was fine.
When I actually went to drive it to my house I got 2 out of 5 miles before it started doing what it did to me.
Titan told me the timing was off and directed me on how to do ith, which I am not mechanically inclined and I know I messed it up. Then I had some other mechanic do it for me and they did it twice, both times it was running just the way it did before.
From then on Titan wants to blame everything that's wrong with it on the initial break in being wrong and me having the timing off... and I think they're doing this so they don't live up to the warranty and I have to pay for it.
As it turns out they open up the valve cover and the #3 rocker (pertaining to the number 2 cylinder) isn't "acting likie it's supposed to." From which I asked another renowned mechanic I know, and he said it has to be either the lifters or rockers on their part.
Just FYI, if you go with Titan make sure you have a veteran automechanic to cut out the bull shit they throw your way so they don't F you over and make you pay the cost of work that they didn't do properly on your end.

DO NOT buy from Titan.

Coffee Commando~

I bought a titan 4.6 and I didn't come with the head gasket on and it didnt fit a renix and getting them to take it back was like pulling teeth and shipping was on my dime both ways. X2 on rebuilding what you got I forgot how great a new 4.0 is plus I still get over 20 mpg, jeep got it right

Sent from my DROIDX using Tapatalk

If you havent dealt with a company, dont badmouth them.
So how about all the people above you who have dealt with them and say they're crap?
 
I have had a Titan 4.7 in my renix XJ for over 2 years now and am very pleased. Service was excellent and they answered all my questions. You guys that dont have personal experiance with a company shouldnt spread rumors. In my case Titan provided a great product and I would not hesitate to buy from them again. I am from Northern Michigan and am in no way affiliated with Titan, so dont even go there.

If you havent dealt with a company, dont badmouth them.

well, you see...

We have dealt with them. We've dealt with them coming on to our forums, creating multiple fake accounts and using them to lie about their products.

Not the actions of a respectable company.
took the words right out of my mouth.
 
Getting around 13-15 in the city, about the same as my old XJ with 33s and a 4.0. Ran 26# injectors I believe and a 63mm TB, going to upgrading my exhaust soon. Will probably look into getting an AEM programmer and getting it dyno tuned eventually.

Thanks for the update. What kind of gas mileage are you getting? Also what did you do to get this running? Larger injectors and/or adjustable MAP sensor? Anything else? Sorry if you've already said in a prior post.
 
Let me know when you are ready to do the AEM F/IC and I will help you out! I will suggest a larger TB, 65mm at the very least. I ran a 68mm (from the 4.7L V8) on the 4.7L Stroker I built way back when. Can help you with that as well... I am also going to suggest 2.5" cat back along with a good performance cat.

I run a Magnaflow cat and a Heartthrob 2.5" cat back. Works just fine and not to loud.
 
This is Dan who sold you the Dana 30 btw in case you didn't realize. Do you think there would be that much of a hp difference from a 63 or a 65 to a 68mm TB? I wouldn't imagine it would be worth it for the hp increase compared to the price of a 68mm. Oh yeah got a new header and I'm going to get a high flow precat replacement from Catco and probably just run 2.5" pipe with a high flow cat and no muffler and see how it sounds.

Can't remember are you running an AEM programmer?

Let me know when you are ready to do the AEM F/IC and I will help you out! I will suggest a larger TB, 65mm at the very least. I ran a 68mm (from the 4.7L V8) on the 4.7L Stroker I built way back when. Can help you with that as well... I am also going to suggest 2.5" cat back along with a good performance cat.

I run a Magnaflow cat and a Heartthrob 2.5" cat back. Works just fine and not to loud.
 
Dan, I put my 68mm TB together for less than $100.00. Do not waste money on a custom built TB when you can fab for less. And it made a huge difference on the 4.7L I had. Perks up the acceleration like you would not believe. Jeep runs a 68mm on the 4.7L for a reason. The reason being that it needs the air flow. So does your 4.9L, only more so.

FYI, I run an AEM F/IC8 on my Heep to control the timing and thte somewhat larger injectors as well as to correct the Speedo. The programming software is free from the AEM website and all you need is a laptop to run it on. To do it right, you also need to install a wideband O2 sensor and have a method to read the PCM via the OBDII port. I can help there also as I have the hardware and software. Ideally you want the Long Term Fuel Trim to be less than 3% and the Short Term Fuel Trim to be less than 5%. These values we can read right out of the PCM while it is running.

No biggie, just consumes a bit of time.

Also, the front end works just fine and I could not be happier with it.
 
what he said.... the only reason a 4.7 is going in my jeep is because i got a spankin deal on it, otherwise my money would have bee better spent on a 5.3 or an LS1

After all I've researched/reviewed on Titan, Golen and 505, I'm certain I'd go with 505 and their turbo-charged set up.

However, having observed the LS2 installed in an XJ, that is the route I've determined to pursue. Since I have the $$$ to do so, I'm going with an LS3 installation. :cool:
 
After all I've researched/reviewed on Titan, Golen and 505, I'm certain I'd go with 505 and their turbo-charged set up.

However, having observed the LS2 installed in an XJ, that is the route I've determined to pursue. Since I have the $$$ to do so, I'm going with an LS3 installation. :cool:

That guy you quoted helped with the build of the LS2 XJ! :D if you got the money the LS swap is a no brainer. I, however, don't have that kind of money....
 
This thread has become famous on other XJ and Jeep forums and talk around the "water cooler" at my shop. Don't have actual figures, but I would willing to say that it has hurt Titan sales of their Jeep products. They do have a great reputation with their GM products though.
 
This thread keeps on delivering in ways that only a few will ever know about. I love it.
It got one of the TOTY nominees for last year banned, guess who?
 
Back
Top