Swapping a 4.0 TB into a 2.5 - NAXJA Forums -::- North American XJ Association

Camshaft · #1 August 1st, 2005, 16:05

I posted this in Street Perf. but I got no replies, i figured I might have posted it in the wrong forum, so here goes:

I have a 2000 Cherokee with a 2.5. At my next oil change, I plan on adding a K&N filter, an Airaid throttle body spacer, and a throttle body from a 4.0. Because the 4.0 TB is bigger, should I get the spacer for the 2.5 or for the 4.0? Thanks!

Is this even worth doing? Will I see any gains over the stock TB?

Dr. Dyno · #2 August 2nd, 2005, 08:55

From what I've heard it's a very good upgrade. Do it, and get the 4.0 spacer as well.

Camshaft · #3 August 2nd, 2005, 13:08

Thanks! Will do.

Purple · #4 August 2nd, 2005, 19:56

get a 62mm throttle body, as for the spacer, my 98 started shifting at weird times/rpms with the spacer, i tossed it. Yes, i had these spacers installed

K&N made a world of difference too... It revs quicker, and the response is much more better. It was worth every penny in my opinion.

Camshaft · #5 August 2nd, 2005, 20:20

Does anyone have a stock one laying around?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swap 4.0 for 4.0HO	DADDJP	Modified Tech Discussion	2	August 18th, 2005 19:46
Swapping a 4.0 TB into a 2.5	Camshaft	Jeep Street and Performance	0	July 29th, 2005 10:44
Swapping a '91 4.0 with a '99 4.0	TLange	OEM Tech Discussion	7	May 3rd, 2005 09:54
2.25 or 2.5 pipe on a HO 4.0	FUNKYTEE5	Jeep Street and Performance	7	November 30th, 2004 23:34
4.0 lt tachometer working in 2.5 lt XJ	SV1CEC	Modified Tech Discussion	34	March 21st, 2004 19:22

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)