flag2442
NAXJA Forum User
- Location
- flagstaff az
I have a 1990 and did a open system conversion. I went with the new t-stat housing and put in the new factory fan switch. I cut the wires off of the old switch that was in the radiator and spliced into the new one.
well the problem is the electric fan wont come on when it gets hot at idle. And this is just before red on the guage. I unplugged the sensor and jumped the wires coming from the old switch and it fires right up. I also replaced the relay. It also somes on with the ac. but plug it in and nothing. the the fan switch in the t-stat housing it brand new.
any suggestions?
thank you flag2442
well the problem is the electric fan wont come on when it gets hot at idle. And this is just before red on the guage. I unplugged the sensor and jumped the wires coming from the old switch and it fires right up. I also replaced the relay. It also somes on with the ac. but plug it in and nothing. the the fan switch in the t-stat housing it brand new.
any suggestions?
thank you flag2442