Raine883
NAXJA Forum User
- Location
- East Texas
So heres the deal 97 xj 180k, factory distributor was done for. It had about 1/2 inch of side to side play but the jeep was running when i pulled it. I replaced it with a spectra but the thing would not land back in the 5 o'clock position, it lands closer to the 6-630. jeep fired up ran like hell idle was all over the place and then it died. I tried swapping the old one back in but it's so ate up it won't seat properly. Timing marks are lined up, cylinder 1 is at top dead. I'm at a loss, is this common with spectra distributors? If so outside of getting robbed by a dealer where do i turn for the correct part?