• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

WTB a ECM for a 1992 XJ 6 cylinder 4x4

94sport

NAXJA Forum User
Location
Whittier
My voltage regulator on my 92xj went out. I swapped my ecu from my 94xj into the 92 and it fixed my problem as a test. Looking for a 92 ecm but think a 93 or 94 will also do? Text 714-401-6079. Louie
 
Thanks, I went and bought it this morning and my jeep is up and running again. Turns out is was the exact part just 10 months newer, it even had the same part code.
 
Out of curiosity I removed some of the silicone on my old ecm and cleaned the board with alcohol and a Q-tip and now it works again. The silicone had tears in it so those were the areas I focused on and I guess moisture and dirt was shorting it out. I resealed it with GE 100% clear silicone.
 
Back
Top