NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Unibody Jeep Technical Forums > Jeep Cherokee XJ (1984 - 2001) > OEM Tech Discussion
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

OEM Tech Discussion Forum for OEM (Original Equipment) or stock XJs and MJs.

Reply
 
Thread Tools Display Modes
  #1  
Old April 30th, 2019, 21:39
Hopelessredneck Hopelessredneck is offline
NAXJA Forum User
 
Join Date: Apr 2019
Location: Mission BC 🇨🇦
Posts: 2
Angry Torque converter wonít go on aw4

So I bought a 97 XJ country it came with a seized 4.0 I have a good 4.0l from a zj so I was unable to pull the tc with the transmission it had to stay with the engine due to not being able to get the tc bolts out of the flex plate till i pulled the crank out of the block but now the tc won go back on to the aw4 no matter how much I spin wiggle and push on the tc it wonít spline on. This it the exact same tc that was on the trans when the engine was bolted to the trans. I found that the inner imput shaft will spin by hand but the outer one will not spin at all even with a pair of Chanel lock pliers on it (with a rag in between to protect the splines) Iím at a loss here any help would be a huge help as in not to familiar with the aw4
Reply With Quote
  #2  
Old May 1st, 2019, 07:10
sidewaysstarion's Avatar
sidewaysstarion sidewaysstarion is offline
Coffee Drinker
 
Join Date: Jan 2012
Location: Torrance, CA
Posts: 2,916
Re: Torque converter wonít go on aw4

Quote:
Originally Posted by Hopelessredneck View Post
So I bought a 97 XJ country it came with a seized 4.0 I have a good 4.0l from a zj so I was unable to pull the tc with the transmission it had to stay with the engine due to not being able to get the tc bolts out of the flex plate till i pulled the crank out of the block but now the tc won go back on to the aw4 no matter how much I spin wiggle and push on the tc it wonít spline on. This it the exact same tc that was on the trans when the engine was bolted to the trans. I found that the inner imput shaft will spin by hand but the outer one will not spin at all even with a pair of Chanel lock pliers on it (with a rag in between to protect the splines) Iím at a loss here any help would be a huge help as in not to familiar with the aw4
The inner shaft should spin and the outer shaft shouldn't spin. It should go back in, you might need to pull it out a little spin it and try putting it back in.
__________________
Quote:
Originally Posted by cracker
I seem to have run out of self tapping washers
99 4.0/AW4/231, with a few basic bolt ons.

Click here to support
Reply With Quote
  #3  
Old May 1st, 2019, 09:25
RCP Phx RCP Phx is online now
NAXJA Forum User
 
Join Date: Mar 2003
Location: Phoenix,Az
Posts: 13,013
Re: Torque converter wonít go on aw4

Which engine did the TC you are trying to use come off of?
Reply With Quote
  #4  
Old May 3rd, 2019, 00:29
Hopelessredneck Hopelessredneck is offline
NAXJA Forum User
 
Join Date: Apr 2019
Location: Mission BC 🇨🇦
Posts: 2
Re: Torque converter wonít go on aw4

Both are 4.0l with aw4ís
Reply With Quote
  #5  
Old May 3rd, 2019, 06:20
RCP Phx RCP Phx is online now
NAXJA Forum User
 
Join Date: Mar 2003
Location: Phoenix,Az
Posts: 13,013
Re: Torque converter wonít go on aw4

Are you sure of that? ZJ's only came with the AW-4 in 1993, after that they went to Chryco transmissions.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AW4 Torque Converter??? KJurasek Jeep Street and Performance 3 April 12th, 2011 06:31
Where to get a Torque Converter ? Hylander Sierra Chapter For Sale 7 July 31st, 2010 01:23
need new torque converter 95xj5spd OEM Tech Discussion 1 November 10th, 2009 21:06
bad torque converter seal=new converter? wishihad1 OEM Tech Discussion 2 January 23rd, 2008 14:42
How to tell if I got a bad torque converter? Nevada City Sparky OEM Tech Discussion 2 June 8th, 2007 13:34


All times are GMT -7. The time now is 08:42.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014