Chaindog
NAXJA Forum User
- Location
- Long Island, NY
So I've been busting my knuckles all weekend trying to get at my Crankshaft Position Sensor, which is dying but not yet dead. I just can't get anything on the bolt. I've seen a few videos of people replacing them, but they always seem to be on rwd models, so they have a lot more room under there.
So what tips do people have for changing this darn thing? I've got about 18" of extensions and a universal joint on it. Any ideas?
(Side note: I saw a bunch of posts on other forums about an access panel under the dash. After tearing most of my dash apart, I found out that a lot of people call their grand cherokee just "cherokee." So that panel does not exist on mine. :smsoap
Max
So what tips do people have for changing this darn thing? I've got about 18" of extensions and a universal joint on it. Any ideas?
(Side note: I saw a bunch of posts on other forums about an access panel under the dash. After tearing most of my dash apart, I found out that a lot of people call their grand cherokee just "cherokee." So that panel does not exist on mine. :smsoap
Max