NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Unibody Jeep Technical Forums > Jeep Cherokee XJ (1984 - 2001) > Modified Tech Discussion
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Modified Tech Discussion Forum for Tech related discussion for Modified XJ's and MJ's.

Reply
 
Thread Tools Display Modes
  #61  
Old May 23rd, 2017, 11:31
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

Quote:
Originally Posted by cleenrob View Post
i dont remember for sure what the cut off is but i think 06 4l60es are contolled a bit different than -05
Yeah I dug a little deeper and the 06+ have the input speed sensor. Gonna have my ecu flashed to an 04 to resolve this.
Reply With Quote
  #62  
Old May 29th, 2017, 16:19
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

So got to do a little today, I took the jeep harness out and while pulling out interior pieces I pulled up the carpet and found this....




Reply With Quote
  #63  
Old May 29th, 2017, 21:16
clydefrog's Avatar
clydefrog clydefrog is offline
NAXJA Member
 
Join Date: Aug 2015
Location: Northern California
Posts: 464
Re: 93 XJ BUILD (WITH LS SWAP)

You have the built in water drainage mod! It is an XJ specialty.
__________________
'87 with over 300k miles, and a CA legal LS swap.
Expedition built: http://www.naxja.org/forum/showthread.php?t=1129315

When you want to be someone you drive a lifted JK, when you already know who you are you drive an old XJ.
Reply With Quote
  #64  
Old May 30th, 2017, 20:32
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

Quote:
Originally Posted by clydefrog View Post
You have the built in water drainage mod! It is an XJ specialty.
Just add it to the list of steel I need to reenforece this thing anyways haha
Reply With Quote
  #65  
Old May 30th, 2017, 21:47
Jeep Driver Jeep Driver is offline
NAXJA Forum User
 
Join Date: Jun 2016
Location: Parrottsville
Posts: 691
Re: 93 XJ BUILD (WITH LS SWAP)

That is perfect for a fiberglass repair.

Four layers of glass and it will be stronger than it ever was.
Reply With Quote
  #66  
Old May 31st, 2017, 11:37
PhotoJared's Avatar
PhotoJared PhotoJared is offline
NAXJA Forum User
 
Join Date: Aug 2012
Location: Las Vegas, NV
Posts: 742
Re: 93 XJ BUILD (WITH LS SWAP)

I'm so glad to have a Southern California/Nevada car....
Reply With Quote
  #67  
Old May 31st, 2017, 16:20
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

Quote:
Originally Posted by PhotoJared View Post
I'm so glad to have a Southern California/Nevada car....
i feel you there, i was not expecting it to be honest. The jeep is really clean...well i thought it was haha, mine may be in california now but when i bought it for a whopping 500 bucks she was a utah plated vehicle so that explains that.
Reply With Quote
  #68  
Old May 31st, 2017, 16:21
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

Quote:
Originally Posted by Jeep Driver View Post
That is perfect for a fiberglass repair.

Four layers of glass and it will be stronger than it ever was.
eh, my dad does sheet metal work for a living ill probably just end up having him help me out with that.
Reply With Quote
  #69  
Old March 6th, 2018, 12:47
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

been a while since i have been on here or updated, alot of stuff came up and the build got put on hold, im just now jumping back into, my motor will be done here soon added some stuff, i ended up with a texas speed and performance cam, hardened pushrods and springs for more lift. When i tore into my motor i found the piston skirts slightly scrapped and the front cam bearing was gouged. I will have the block back soon with new bearings. The heads were cleaned up decked and had a little porting done. While the motor is out, im trying to handle some of the wiring. On the jeep side of things what all do i need to keep? Ignition, battery, and interior stuff?
Reply With Quote
  #70  
Old March 8th, 2018, 16:23
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

those of you that have done this swap before, is it possible to use a NP241c from a late 90s gm? For easy of going together with the 4l60e.
Reply With Quote
  #71  
Old March 9th, 2018, 01:02
indian's Avatar
indian indian is offline
NAXJA Forum User
 
Join Date: Dec 2015
Location: bratislava, slovakia
Posts: 79
Re: 93 XJ BUILD (WITH LS SWAP)

Quote:
Originally Posted by 92xjRJ View Post
those of you that have done this swap before, is it possible to use a NP241c from a late 90s gm? For easy of going together with the 4l60e.
241c should be bolt on

I used 231J with adapter
Reply With Quote
  #72  
Old March 9th, 2018, 17:22
cleenrob's Avatar
cleenrob cleenrob is offline
NAXJA Forum User
 
Join Date: Nov 2012
Location: Converse TX
Posts: 370
Re: 93 XJ BUILD (WITH LS SWAP)

Quote:
Originally Posted by 92xjRJ View Post
those of you that have done this swap before, is it possible to use a NP241c from a late 90s gm? For easy of going together with the 4l60e.
yes, you can get an sye for it from jb conversions

also they had a couple different spline count input shafts

you want the 27 spline
Reply With Quote
  #73  
Old March 14th, 2018, 10:34
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

Thanks guys! I kind of figured it would be. You don't think there would be any tunnel or clocking issues?
Reply With Quote
  #74  
Old November 2nd, 2018, 12:03
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

So since I haven't posted in a while, not much has changed, got my lady Into a newer dd so it put me on pause for a while. It's pretty cool though (4runner). But as far as the swap I'm just waiting on the accessory drive brackets and I'll drop it in and start saving for a trans. Also I purchased the harness from PSI conversions and i must say I'm very satisfied with it! Great quality!



Reply With Quote
  #75  
Old November 16th, 2018, 11:38
92xjRJ 92xjRJ is offline
NAXJA Forum User
 
Join Date: Sep 2015
Location: Arroyo Grande, CA
Posts: 94
Re: 93 XJ BUILD (WITH LS SWAP)

Been on a bit of a budget lately but I have been sourcing small little pieces to get this thing rollin. I just picked up a cooling fan from a 99 Volvo s70 I believe, pretty much the same as the Taurus fan but it comes with the relay block and easy wiring! Also have most the parts to do my fuel system, areomotive adjustable fuel pressure regulator and new -6an fuel line with pushlok fittings, removed abs hardware and got an adjustable brake proportioning block since I will be going to the 8.8 with disk in the rear it will be easy to adjust on the fly.






Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
93 XJ BUILD (WITH LS SWAP) 92xjRJ Modified Tech Discussion 0 May 5th, 2017 12:21
88 MJ Build / Axle Swap with Q's laxbro37 Jeep Comanche MJ (1985 - 1992) 3 January 31st, 2017 07:35
XJ 5.3 swap (build) blistovmhz Modified Tech Discussion 4 March 19th, 2016 19:26
Looking for two build threads...unibody swap and engine swap ffjosh Modified Tech Discussion 19 July 31st, 2012 21:26
Santa's tear-down/swap/build-up juryrigjalopy SoCal Chapter 80 August 10th, 2007 16:35


All times are GMT -7. The time now is 08:16.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014