• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Another dumb a** lift question

lsc910

NAXJA Forum User
Location
New Jersey
Hello everyone I was given a pro comp lift that was supposed to be a 3'' kit but It was an add a leaf and I'm putting together a Dakota bastard pack. My question is about the lower control arms that came with the kit, They are 16'' center to center and I'm wondering if that is going to enough for a 4.5'' to 5'' kit or do I need longer ones? My next question would have to be about the bastard pack and the keepers or clamps that hold the springs from fanning out. If I was to make a u shaped retainer like thew ones that come on some lift springs ,how do I secure them to the spring without damaging the hardened spring can you weld them on? Thanks for the info.
 
Back
Top