Tonybeirut
NAXJA Forum User
- Location
- Lebanon
Hi guys so my aw4 doesn't shift when its cold, it stays in 1st gear until it warms up. I must warm the engine 5 minutes before driving getting it to operating temp otherwise the transmission won't shift normally.
When cruising on highway (around 70 kmph) and when I press the brake pedal the RPM won't jump 500 means the torque converter not working. I even have the rad design shifter with the torque converter manual switch, this one not working as well, the tc not locking / unlocking when I engage it manually.
I have the brake switch problem by the way, my brakes are always on until I sticked a coin on the pedal upper arm to make the brake lights go off.
Any tests that I should do to narrow the problem?
Thanks
When cruising on highway (around 70 kmph) and when I press the brake pedal the RPM won't jump 500 means the torque converter not working. I even have the rad design shifter with the torque converter manual switch, this one not working as well, the tc not locking / unlocking when I engage it manually.
I have the brake switch problem by the way, my brakes are always on until I sticked a coin on the pedal upper arm to make the brake lights go off.
Any tests that I should do to narrow the problem?
Thanks