chickenbot
NAXJA Forum User
- Location
- frisco
Mine is a 93 btw
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
5.2 l zj alternator in xj help 136a
- Thread starter chickenbot
- Start date
- Location
- San Diego
I ran into the same situation when I upgraded the cables on my 95. Run the new wire to the end of the fuse block just like you did in the picture you posted.
I didn't try to remove the old alternator wire from under the fuse block. I just safed it off and kept it inside the loom. Been that way for a while now and no issues. I used JeepCables and he agreed that's how to do it.
On my 97 and 99, they didn't have the wire coming out from the bottom of the fuse block. They were a little easier to do.
Hope that helps.
I didn't try to remove the old alternator wire from under the fuse block. I just safed it off and kept it inside the loom. Been that way for a while now and no issues. I used JeepCables and he agreed that's how to do it.
On my 97 and 99, they didn't have the wire coming out from the bottom of the fuse block. They were a little easier to do.
Hope that helps.
chickenbot
NAXJA Forum User
- Location
- frisco
Done
