• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Best battery clamps w accessory studs

Got it. Bought some fancy crimpers off Amazon. Should be good to go.

Sent from my SM-G975U using Tapatalk
 
Best I have found so far is the plain old battery terminals, with a few simple mods

Battery_Terminals.sized.jpg


Remove the cheap bolts that hold the clamping bar, install 1"+ bolts from the bottom to create studs, and then use locking flange nuts or wing nuts to secure the leads. Then run a bolt through the clamp holes for the battery post, for additional mounts and for clamping a charger.
 
That is certainly an improvement over using the clamping bar the way those things are designed to be used.

Is it possible to get those in separate positive and negative designs? It looks like you are pretty much all out of clamping range on the negative side.
 
Back
Top