sandman
NAXJA Forum User
- Location
- Central Pa
99 sport
Havin some issues with the hazards working on all corners at once (sometimes only front driver side, sometimes only rear, sometimes all, etc.) so im thinkin the switch is corroded. I think the contacts inside could use a cleanin. So i started to pry the swith apart a little, and saw a LOT of springs, and promplty put it back together. are these suckers going to go everywhere when i take it apart? has anyone even tried to service a ts/hb/hazard switch?
cheapest new one i can find is about 65 from napa. might go to a yard and try to find one. but thought I'd try this first. one way or another the suckers comin apart, but any help with puttin it back together is greatly appreciated.
:viking:
Havin some issues with the hazards working on all corners at once (sometimes only front driver side, sometimes only rear, sometimes all, etc.) so im thinkin the switch is corroded. I think the contacts inside could use a cleanin. So i started to pry the swith apart a little, and saw a LOT of springs, and promplty put it back together. are these suckers going to go everywhere when i take it apart? has anyone even tried to service a ts/hb/hazard switch?
cheapest new one i can find is about 65 from napa. might go to a yard and try to find one. but thought I'd try this first. one way or another the suckers comin apart, but any help with puttin it back together is greatly appreciated.
:viking:
