EFR98XJ
NAXJA Forum User
- Location
- Bolingbrook, Illinois
Ok I know this has been beat to death but I have one simple(?) question. I have a '98 with a cluster going nuts and the 1698 code. Been happening for 2 years and only in the winter. Anyway, replaced the gauge harness per TSB and checked all grounds. Still not fixed. Checked neg CCD bus wire from PCM to TCU. Got 4ohms. Checked the pos side and got 1.7ohms. Its obvious that I have an open on that line. My Q is--- Does that open wire affect the cluster? Thanks