• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Brake problems after installing YJ brake lines

C-MuRdaA

NAXJA Forum User
Location
Queens, NY
I installed YJ brake lines in the front of my XJ but I cannot get a hard pedal.
After installing the driver's side line I bled the brakes and all was fine. I installed the pass. side line and I cant get a hard pedal. I tried bleeding from the MC but that didnt work. I have installed a NEW MC but that didnt work either. I have a booster from a '97 ready to go in but before I rip everything apart again I want to see if I missed anything. I also installed new pads which I needed but before and after I installed them I had the same problem.

I have driven around my block and I can stop but there is only pressure at the bottom of the pedal and they are defintely not road worthy by any means.

TIA
 
Back
Top