outlander
NAXJA Forum User
- Location
- Columbus,Ohio
89 xj 4.0 stick shift.
I have an intermittent problem it seems like it has cropped up since the weather has been in the 90s here.
Sometimes when I start the engine and go to Revit it will only go to 1000 RPM then it starts to spit and sputter.
Then after about 20 or 30 seconds of pushing on the gas and messing around it revs past that point and everything is fine think I should change my TPS?
I have an intermittent problem it seems like it has cropped up since the weather has been in the 90s here.
Sometimes when I start the engine and go to Revit it will only go to 1000 RPM then it starts to spit and sputter.
Then after about 20 or 30 seconds of pushing on the gas and messing around it revs past that point and everything is fine think I should change my TPS?