01 XJ 4x4 195k
Rough Country 4.5" lift
15" alloy wheels 32" tires
Fixed length extended lower control arms
I have replaced
Steering gear box
All tie rods
All 4 balls joints with Moog
Hubs with Chrysler OE parts
Axle shaft u-joints Spicer
Rear driveshaft u-joints Spicer
Sway bar bushings frame and end links Moog
Upper control arm axle side bushings
Track bar
Track bar bracket new one welded on axle side
The truck vibrates between 60-70 on the highway and I just can't figure it out, all above parts were worn and needed replacing but I'm at a loss as to what's left. I have run with just the rear driveshaft and it still had vibes, swapped to just the front still had vibes. At this point I'm thinking possibly front axleshaft bearings but only because that's all that's left, I'm at a loss.
Sent from my 2PZC5 using Tapatalk
Rough Country 4.5" lift
15" alloy wheels 32" tires
Fixed length extended lower control arms
I have replaced
Steering gear box
All tie rods
All 4 balls joints with Moog
Hubs with Chrysler OE parts
Axle shaft u-joints Spicer
Rear driveshaft u-joints Spicer
Sway bar bushings frame and end links Moog
Upper control arm axle side bushings
Track bar
Track bar bracket new one welded on axle side
The truck vibrates between 60-70 on the highway and I just can't figure it out, all above parts were worn and needed replacing but I'm at a loss as to what's left. I have run with just the rear driveshaft and it still had vibes, swapped to just the front still had vibes. At this point I'm thinking possibly front axleshaft bearings but only because that's all that's left, I'm at a loss.
Sent from my 2PZC5 using Tapatalk