HuntFish 01XJ
NAXJA Forum User
- Location
- Patchogue, NY
Looking for recommendations on sye/hnt rear driveshaft for 01 xj 4.5 lift with a 8.8 rear. I have the rubicon express flange on the t case and the 8.8 has a flange too.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Looking for recommendations on sye/hnt rear driveshaft with 8.8 flanges
- Thread starter HuntFish 01XJ
- Start date
- Location
- Reno, NV
You can add the flange to any driveshaft that is the correct length. It is pretty simple to do it yourself or you can have a driveshaft shop put it on. I got my main driveshaft made locally, and have a backup shaft from Tom Woods. Most driveshaft shops will sell you a shaft with the flange already installed. Here is the 1310 flange - https://www.amazon.com/Spicer-2-2-1379-Flange-Yoke/dp/B00GAPJQAE/ref=sr_1_3?
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
Your asking a lot from that combination and all the additional weight.
HuntFish 01XJ
NAXJA Forum User
- Location
- Patchogue, NY
*
RCP Phx
NAXJA Forum User
- Location
- Phoenix,Az
How about just getting it rebuilt?
HuntFish 01XJ
NAXJA Forum User
- Location
- Patchogue, NY
That's not a bad idea, the local shop said it would be 275 to rebuild and a tom woods new one costs 335 so idk I may just get the new one and keep this as a backup.
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
275 for new joints, center ball, and balance sounds about right. if you dont have a spare and money isnt an issue, good opportunity.
