• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Rotten Ignition Coil Connector and Aftermarket Tach Wiring.

EOMFDcox

NAXJA Forum User
Location
Oregon
I have a 1999 Cherokee that has the dash without the tachometer. The previous owner installed an aftermarket tach and hooked everything up besides the signal wire. I did some research and figured out that you want to tap into the negative signal wire coming out of the ignition coil. I took a look at mine and found it in poor condition, I was wondering if anyone had the part number or could point me in the right direction to find a replacement I could splice in. I’ve tried google but all I get are ads for the wrong part. Also I was going to tap into the green and brown wire for the tach signal, is this the correct one? Thanks for you help, I’ll post a picture of what I’m talking about to give you a better idea.
Hl7dHFp
 
Back
Top