Booster Upgrade

[giacomo.m]

Hey,

thank you so much for your answer

so do you think the BLA-G360 / BLA-R340 / BLF-31B / BLF-33B that I bought are not okay ?


thank you


Giacomo

[jeepboy12001]

Originally Posted by giacomo.m

Hey,

thank you so much for your answer

so do you think the BLA-G360 / BLA-R340 / BLF-31B / BLF-33B that I bought are not okay ?


thank you


Giacomo

You'll need to extend the BLA-G360 and BLA-R340. 8 inches is not enough to make it over to the propotioning valve.
If its not your daily I would also check and make sure your fittings arn't frozen in the proportioning valve. If they are you will have to take another path with the connections.

[jeepboy12001]

Might also pick up a brake line bending tool and some flare nut wrenches. They will make your life easier.

[giacomo.m]

" If they are you will have to take another path with the connections."
that is, what should I have in stock ?
thank you


Giacomo

[giacomo.m]

Thank you jeepboy12001


so if i buy 2 flexi lines (52128086/52128087) which fittings should i use to connect the hoses to the proportioning valve ?


Giacomo

[giacomo.m]

Hi all,


nobody knows which fittings I have to buy for connect the 2 flexi lines to the proportioning valve ?
thank you


Giacomo

[giacomo.m]

Hi all,
update of problem,

in the end I to fit the 2000 WJ master cylinder and brake booster with the fittings and tubes that I described a few posts ago, with new rear brake drums and new brake cylinders

the braking has improved considerably, but the brake pedal has a too long stroke, it acts only in the last part of its stroke. is this normal or can I do something ?
how can i attach pics ?
thank you


Giacomo

[cruiser54]

adjust up the rear brake shoes first. Perhaps re-bleed the system.

[giacomo.m]

Already adjusted the rear brake shoes, in fact now the wheel is slightly braked....

do you know how to attach pics ?
thank you



Giacomo

[cruiser54]

Have you bled the brakes again?
RR,LR,RF,LF

[giacomo.m]

bleeding done 3/4 times...


Giacomo

[cruiser54]

Did you bleed the master cylinder first?

[giacomo.m]

Yes on bench....

Giacomo

[giacomo.m]

Hi all,


as already mentioned, the swap has brought about a 100% improvement in braking (even if in the first part of the brake pedal stroke there is no effect) but now I no longer have the rear brake lights ...

brake light switch or an adjustment problem of the same on the brake booster rod ?
thank you


Giacomo

[giacomo.m]

I also saw that there is another white switch on the brake pedal, on the top what is its function ?

could it possibly be used for the rear stop lights ?


Giacomo