• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Yota pickup with Long travel

Mike1331

NAXJA Forum User
Location
Folsom, CA
Selling my prerunner to buy a race truck... so cash only pls.


$4,800

1990- 161k Miles on entire truck
Im going from norcal to san diego this week to pick up a rig and can tow it with me if you're serious.

Registration just renewed in June 2014 and passed smog last year

Front: Velocity Fab unibal kit w/ FOA coilovers
CONE industries racing Hub's with 5/8" wheel studs
FK Unibals and heims are all tight
New total chaos poly center pivot bushings
1.5" 1/4 wall dom steering
needs to install factory centerlink to eliminate all bumpsteer, other than that its a very solid kit that should take a ton of abuse.

Full Ivan Dan glassworks fiberglass kit

Rear: Custom spring pack with 12" GIANT shackles, pivot points welded over the frame, and a simple space saving bedcage w/ 18" FOA'S
Full usable bed that still fits (2) dirtbikes and gear
Pulls 15.5" of travel and handles well
4:10 gears

Motor: 22re- Runs very strong w/ the below new parts that i have receipts for
New timing chain kit w/ metal guide that will last forever
New water pump
New radiator
New OEM toyota Ignitor- $334
New OEM toyota distributor- $256
New ignition Coil
New Plug wires
New Plugs
New valve cover gasket
New Alternator
Belts are all new

Interior: In good shape with a grant steering wheel and Pioneer deck

Tire/wheels:
(4) bfg AT 33"x10.50x15/ (5) 15x8 AR Outlaw II's- Will also throw in 2 spare 33's and a spare 31".



20140222_213122_zps87e4f8a9.jpg

temporary_zps038ca22b.jpg

temporary_zps469c7ee6.jpg

temporary_zps9c59ea9b.jpg





Few more took today if how it sits now...

apygu5yn.jpg

zyne5yje.jpg

5uba2ate.jpg

ujegutyb.jpg



Arms and spindles are all tig welded
qyjaryha.jpg

uba2ubeh.jpg




Some spare parts will include a driveshaft, powder coated intake mani, stock gusseted spindles drilled for unibals, newish LUK clutch, idler arms, engine mounts and lots more.
u9y4atej.jpg

uqyny9ub.jpg

a4uvupad.jpg
 
Last edited:
Back
Top