• NAXJA is having its 18th annual March Membership Drive!!!
    Everyone who joins or renews during March will be entered into a drawing!
    More Information - Join/Renew
  • Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Sneak Peak - Warrior Products XJ Rear Bumper

WheelinJR

NAXJA Forum User
Location
Portland, Oregon
So I've been doing this buildup since last week, prepping for photos for some catalogs.

This is the Jeep I've been working on.

xj001.jpg


And here is the sneak peak. This is the XJ Rear Bumper I've been working on. This is prototype only, final version will be about the same, but I have some fine tuning to do.

Hitch compatible, it now has a notch in the bottom to clear the receiver.

D-Rings are double backed and welded into the mounting legs, which are tied into factory 8 bolts + 6 bolts into the framerails. Non D-Ring versions will not tie into the additional 6 bolts.

Production versions should be ready within a month or two. We have no plans of doing tire carrier models.

xj009.jpg


xj008.jpg


xj007.jpg


xj006.jpg
 
Back
Top