NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > NAXJA Unibody Jeep Technical Forums > Jeep Cherokee XJ (1984 - 2001) > OEM Tech Discussion
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

OEM Tech Discussion Forum for OEM (Original Equipment) or stock XJs and MJs.

Reply
 
Thread Tools Display Modes
  #1  
Old June 3rd, 2023, 16:40
JeffDB JeffDB is offline
NAXJA Forum User
 
Join Date: Aug 2020
Location: Minnesota
Posts: 23
Running just fine then dies at idle on street

Had my 98 XJ die on me on street today. Engine had been running smooth with no problems starting. The only issue I noticed is my temp gauge would get just a little above 210 but no higher and the oil pressure gauge would furiously from 40 psi at idle down to 20 psi and fluctuate back and forth. It only did it once engine was at operating temp. Suspect it’s oil send unit. After it died it would crank over but not start. If the send unit failed would it cause engine to die and not start?
Reply With Quote
  #2  
Old June 4th, 2023, 07:28
lawsoncl lawsoncl is offline
NAXJA Forum User
 
Join Date: Jan 2006
Location: North Idaho
Posts: 5,927
Re: Running just fine then dies at idle on street

The oil pressure sensor failing is pretty common, but won't stop it from starting. The most likely culprit is the crank position sensor. Have you checked for any codes?
Reply With Quote
  #3  
Old June 4th, 2023, 11:41
Unclewolverine Unclewolverine is offline
NAXJA Forum User
 
Join Date: Jun 2019
Location: Kansas
Posts: 861
Re: Running just fine then dies at idle on street

Oil pressure sensor only runs the gauge, no effect on engine running. X2 on the cps as the main culprit. Could also be tps or the fuel pump went out.
Reply With Quote
  #4  
Old June 4th, 2023, 14:33
JeffDB JeffDB is offline
NAXJA Forum User
 
Join Date: Aug 2020
Location: Minnesota
Posts: 23
Re: Running just fine then dies at idle on street

Quote:
Originally Posted by lawsoncl View Post
The oil pressure sensor failing is pretty common, but won't stop it from starting. The most likely culprit is the crank position sensor. Have you checked for any codes?
Check engine light didn’t come on at all. I had it towed to my tech buddies shop so he’ll probably do that this week when he gets to it.
Reply With Quote
  #5  
Old June 5th, 2023, 08:49
90xj06's Avatar
90xj06 90xj06 is offline
NAXJA Forum User
 
Join Date: Aug 2006
Location: Peabody, MA
Posts: 1,778
Re: Running just fine then dies at idle on street

does the rpm gauge jump up during cranking? it should go to about 300 rpms. if it doesn't move I would suspect Crank sensor or wiring.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
dies in drive fine in reverse 1slowxj OEM Tech Discussion 0 May 8th, 2014 13:24
Engine dies.....then restarts fine mako my day OEM Tech Discussion 8 February 27th, 2013 19:41
Starts fine, drives fine, bucks, sputters and dies randomly? tayman OEM Tech Discussion 94 July 19th, 2011 12:52
xj was running fine, then sputters at stops, then dies. tonexj OEM Tech Discussion 6 December 11th, 2009 07:36
98 xj dies at idle, at speed runs fine BigRedsXJ OEM Tech Discussion 23 February 26th, 2007 20:03


All times are GMT -7. The time now is 06:20.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014