NAXJA Forums -::- North American XJ Association  

Go Back   NAXJA Forums -::- North American XJ Association > Land Use / Off Topic and other Forums > Tools and Garages
HOME Member FAQ Sponsor Info Rules Bylaws E-Mail

Tools and Garages This is a place to share about the tools and workspaces used to craft your latest masterpiece.

Thread Tools Rate Thread Display Modes
Old December 26th, 2018, 15:45
R.DesJardin's Avatar
R.DesJardin R.DesJardin is offline
NAXJA Member
Join Date: Aug 2008
Location: Clarkston, WA
Posts: 624
HF Gantry Widened

So I bit the bullet and bought a HF 1T Gantry, not a big HF fan but it has features I liked and thought I would give it a go. Issue is stock sucks and it too narrow to straddle my flat bed trailer. I did some research and actually found a gantry with a similar design to how I widened mine.
3/8" x 8" plate 21 5/8" long with a set of holes to allow me to move the beam mount wider on each size by the hole spacing of ~9 5/8". Sides are 1/4" plate the same length. the inner 4 bolts are full length the height of the beam clamping it all together.
Rory-RADesigns Products LLC
Auto Trans Shifters and Shift Controllers "Shift to the Best"
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Widened Body XJ on CL CaliGold Non-Tech / Off Topic 39 March 5th, 2010 12:01

All times are GMT -7. The time now is 04:17.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
NAXJA and NAXJA logo's Copyright NAXJA. All content/images Copyright NAXJA 1999-2014